- New
Chicago-Latrobe 11055 #25 6 IN A/C EXTENSION DRILL
- Write a review
$8.12
Applicable MaterialsAlloy Steel, Carbon Steel and Cast IronCutting Depth1-7/8 inCutting DirectionRight HandCutting Edge MaterialHSSDrill Size - Decimal Inch0.1495 inDrill Size - Wire#25FinishBlack Oxide/Steam OxideFlute Length1-7/8 inFlute TypeSpiralMaterialHSSNumber of Flutes2Overall Length6 inPoint Angle135 degPoint TypeSplitSeries906Shank Size0.1495 inShank TypeStraightStyle906Surface ConditionSteam OxideTool Size#25TypeType B Extra Length
Specifications
| Auxiliary lip | No |
| Design | HM14 |
| Housing bore diameter | 36.525 mm, 1.438 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 5.57 m/s |
| Rotational speed | 3723.0 r/min |
| Seal width | 5.156 mm, 0.203 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 28.575 mm, 1.125 in |
| Type of outside diameter | Metal-cased |
| Unit system | Inch |
11055
