- New
Chicago-Latrobe 47474 250 AN #16
- Write a review
$4.83
Applicable MaterialsAlloy Steel, Carbon Steel and Cast IronCutting Depth2-3/16 inCutting DirectionRight HandCutting Edge MaterialHSSDrill Diameter Measurement SystemImperialDrill Size - Decimal Inch0.177 inDrill Size - Wire#16FinishSteam OxideFlute Length2-3/16 inFlute TypeSpiralMaterialHSSNumber of Flutes2Overall Length3-3/8 inPoint Angle118 degPoint TypeRadialSeries250ANShank Size0.177 in Dia x 1.1875 in LShank TypeTangedStyle250ANSurface ConditionSteam OxideThrough Coolant (Yes/No)NoTool Size#16
Specifications
| Auxiliary lip | No |
| Design | CRWH1 |
| Housing bore diameter | 152.43 mm, 6.001 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 11.41 m/s |
| Rotational speed | 1800.0 r/min |
| Seal width | 12.7 mm, 0.5 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 120.65 mm, 4.75 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
47474
