Chicago-Latrobe 44276 150-D #6
- Write a review
$4.48
Applicable MaterialsNon-Ferrous MetalsCutting Depth5XDCutting DirectionRight HandCutting Edge MaterialHSSDrill Diameter Measurement SystemImperialDrill Size - Decimal Inch0.204 inDrill Size - Wire#6FinishBrightFlute Length2-1/2 inFlute TypeRight SpiralMaterialHSSNumber of Flutes2Overall Length3-3/4 inPoint Angle118 degPoint TypeRadialSeries150DShank Size0.204 in Dia x 1.25 in LShank TypeStraightStyle150DSurface ConditionBrightThrough Coolant (Yes/No)NoTool Size#6TypeGeneral Purpose
Specifications
| Auxiliary lip | No |
| Design | CRWH1 |
| Housing bore diameter | 139.73 mm, 5.501 in |
| Maximum operating temperature | 200.0 °C, 392.0 °F |
| Maximum operating temperature (°F) | 200.0 °C, 392.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 34.31 m/s |
| Rotational speed | 5820.0 r/min |
| Seal width | 12.7 mm, 0.5 in |
| Sealing lip material | Fluoro rubber (FKM) |
| Shaft diameter | 112.73 mm, 4.438 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
44276
