Flexco 314011 RCTP-LEG-NOTCHER-TP-CUTTER Leg Notcher and Transfer Plate CutterRCTP-LEG-NOTCHER-TP-CUTTER Leg Notcher and Transfe

ROLLER CONVEYOR TRANSFER PLATESTransporting products across a roller conveyor, whether belt driven, line shaft driven, chain driven, or MDR & band, presents a unique problem – product loss between rollers. Roller Conveyor Transfer Plates (RCTP) from Flexco keeps your product moving to its final destination by floating in between two rollers, covering the gap and preventing envelopes, polybags, and small packages from falling in the spaces between. RCTPs also help prevent workers from reaching into the areas between rollers to retrieve parcels and getting caught, pinched, or injured on the drive bands, belts, or chains.FEATURES & BENEFITSIdeal for operations that transport a variety of packaged products – from soft and pliable to dense and compact. Made from proprietary low-friction material that offers superior wear and impact resistance. Bright yellow color makes plates easy to see and monitor.Available in 12" transfer plates that are easily cut to length for any roller conveyor width.INSTALLATIONRoller Conveyor Transfer Plates (RCTP) have a snap-in-place design, making them easy to install and replace as needed.To install:Inspect roller conveyor area to ensure it is free of debris and ready for installation.Remove significant debris build up on rollersMeasure width at inside of conveyor frameDetermine number of RCTP 12" transfer plates requiredCut transfer plates to lengthMinimum transfer plate cut length is 4" (each leg section is 1")Use leg notcher to cut the legs at their base just before desired lengthUser plate cutter to cut transfer plate to lengthRCTP installationInsert RCTP using a rocking motion from the side into the roller gap. Do not insert from the end.Place cut end transfer plate up to adjoining transfer plate with spring tab placed against the conveyor frameDesigned to slightly float in the gapAdjusting end tab may assist with length modification.