JET 892511 EGH-1740 With Newall DP700 DRO
- Write a review
$40,359.00
Amperage Draw @ 230V 3Ph22Amperage Draw @ 460V 3Ph11Compound Slide Travel (In.)6-2/7Diametral Pitch Threads Number21DriveGeared HeadLength of Gap (In.)7-2/3Max Tool Size (In.)1 x 1Modular Pitch Threads Number18Number of Inch Threads45Number of Metric Threads39Number of Spindle Speeds12Overall Dimensions (L x W x H) (In.)94 x 44 x 68Range of Cross Feeds (IPR)0.00075 - 0.02Range of Inch Threads (TPI)2 - 72Range of Longitudinal Feeds (IPR)0.0015 - 0.04Range of Metric Threads0.2 - 14Range of Spindle Speeds (RPM)36 - 1,800Size17 x 40Spindle Bore (In.)3-1/8Spindle MountD1-6Spindle Taper with SleeveMT-5Steady Rest Capacity (In.)3/8 - 6-3/4Style (Type)EngineSwing Over Bed (In.)17Swing Over Cross Slide (In.)11Tailstock Spindle Travel (In.)5Weight (Lbs.)3747Width of Bed (In.)12
Specifications
| Amperage Draw @ 230V 3Ph | 22 |
| Amperage Draw @ 460V 3Ph | 11 |
| Compound Slide Travel (In.) | 6-2/7 |
| Diametral Pitch Threads Number | 21 |
| Drive | Geared Head |
| Length of Gap (In.) | 7-2/3 |
| Max Tool Size (In.) | 1 x 1 |
| Modular Pitch Threads Number | 18 |
| Number of Inch Threads | 45 |
| Number of Metric Threads | 39 |
| Number of Spindle Speeds | 12 |
| Overall Dimensions (L x W x H) (In.) | 94 x 44 x 68 |
| Range of Cross Feeds (IPR) | 0.00075 - 0.02 |
| Range of Inch Threads (TPI) | 2 - 72 |
| Range of Longitudinal Feeds (IPR) | 0.0015 - 0.04 |
| Range of Metric Threads | 0.2 - 14 |
| Range of Spindle Speeds (RPM) | 36 - 1,800 |
| Size | 17 x 40 |
| Spindle Bore (In.) | 3-1/8 |
| Spindle Mount | D1-6 |
| Spindle Taper with Sleeve | MT-5 |
| Steady Rest Capacity (In.) | 3/8 - 6-3/4 |
| Style (Type) | Engine |
| Swing Over Bed (In.) | 17 |
| Swing Over Cross Slide (In.) | 11 |
| Tailstock Spindle Travel (In.) | 5 |
| Weight (Lbs.) | 3747 |
| Width of Bed (In.) | 12 |
892511
