Powermatic 1791000K PM1000 Tablesaw 1-3/4HP 1PH 115V 30" Accu-Fence System with Riving Knife
- Write a review
$2,799.99
Arbor Diameter (In.)5/8Arbor Speed (RPM)4200Blade Diameter (In.)10Dust Collection Minimum CFM Required (CFM)350Dust Port Outside Diameter (In.)4Gross Weight (Lbs)289Height53 inLength42 inMaximum Depth of Cut (In.)2-1/8 or 3-1/8Maximum Depth of Cut at 45 Degrees (In.)2-1/8Maximum Diameter of Dado (In.)8Maximum Rip Left of Blade (In.)12Maximum Rip Right of Blade (In.)30Maximum Width of Dado (In.)13/16Miter Gauge TypeT-Slot with StopsMotor Phase1Motor Power (HP)1-3/4Motor Voltage (V.)115/230Net Weight (Lbs.)289Overall Dimensions (L x W x H) (In.)43 x 61 x 44Prewired Voltage (V.)115Recommended Circuit Size (Amps.)20Style (Type)CabinetTable Height from Floor (In.)34-1/4Table in Front of Saw Blade at Maximum Depth of Cut (In.)10Table TypeCast IronWidth33 in
Specifications
| Arbor Diameter (In.) | 5/8 |
| Arbor Speed (RPM) | 4200 |
| Blade Diameter (In.) | 10 |
| Dust Collection Minimum CFM Required (CFM) | 350 |
| Dust Port Outside Diameter (In.) | 4 |
| Gross Weight (Lbs) | 289 |
| Height | 53 in |
| Length | 42 in |
| Maximum Depth of Cut (In.) | 2-1/8 or 3-1/8 |
| Maximum Depth of Cut at 45 Degrees (In.) | 2-1/8 |
| Maximum Diameter of Dado (In.) | 8 |
| Maximum Rip Left of Blade (In.) | 12 |
| Maximum Rip Right of Blade (In.) | 30 |
| Maximum Width of Dado (In.) | 13/16 |
| Miter Gauge Type | T-Slot with Stops |
| Motor Phase | 1 |
| Motor Power (HP) | 1-3/4 |
| Motor Voltage (V.) | 115/230 |
| Net Weight (Lbs.) | 289 |
| Overall Dimensions (L x W x H) (In.) | 43 x 61 x 44 |
| Prewired Voltage (V.) | 115 |
| Recommended Circuit Size (Amps.) | 20 |
| Style (Type) | Cabinet |
| Table Height from Floor (In.) | 34-1/4 |
| Table in Front of Saw Blade at Maximum Depth of Cut (In.) | 10 |
| Table Type | Cast Iron |
| Width | 33 in |
1791000K