Powermatic PM25330K PM2000 10" Tablesaw 5HP 3PH 230/460V 30" Accu-Fence System
- Write a review
$4,999.99
Arbor Diameter (In.)5/8Arbor Speed (RPM)4500Blade Diameter (In.)10Dust Collection Minimum CFM Required (CFM)400Dust Port Outside Diameter (In.)4Gross Weight (Lbs)548Maximum Depth of Cut (In.)2-1/8 or 3-1/8Maximum Depth of Cut at 45 Degrees (In.)2-1/8Maximum Diameter of Dado (In.)8Maximum Rip Left of Blade (In.)13-1/2Maximum Rip Right of Blade (In.)30Maximum Width of Dado (In.)13/16Miter Gauge TypeT-Slot with StopsMotor Amps6.5Motor Phase3Motor Power (HP)5Motor Voltage (V.)230/460Net Weight (Lbs.)398Overall Dimensions (L x W x H) (In.)66-3/4 x 39-1/8 x 40-3/8Prewired Voltage (V.)230Recommended Circuit Size (Amps.)20Style (Type)CabinetTable Height from Floor (In.)35Table Size (L x W) (In.)30-1/2 x 22Table TypeCast Iron
Specifications
| Arbor Diameter (In.) | 5/8 |
| Arbor Speed (RPM) | 4500 |
| Blade Diameter (In.) | 10 |
| Dust Collection Minimum CFM Required (CFM) | 400 |
| Dust Port Outside Diameter (In.) | 4 |
| Gross Weight (Lbs) | 548 |
| Maximum Depth of Cut (In.) | 2-1/8 or 3-1/8 |
| Maximum Depth of Cut at 45 Degrees (In.) | 2-1/8 |
| Maximum Diameter of Dado (In.) | 8 |
| Maximum Rip Left of Blade (In.) | 13-1/2 |
| Maximum Rip Right of Blade (In.) | 30 |
| Maximum Width of Dado (In.) | 13/16 |
| Miter Gauge Type | T-Slot with Stops |
| Motor Amps | 6.5 |
| Motor Phase | 3 |
| Motor Power (HP) | 5 |
| Motor Voltage (V.) | 230/460 |
| Net Weight (Lbs.) | 398 |
| Overall Dimensions (L x W x H) (In.) | 66-3/4 x 39-1/8 x 40-3/8 |
| Prewired Voltage (V.) | 230 |
| Recommended Circuit Size (Amps.) | 20 |
| Style (Type) | Cabinet |
| Table Height from Floor (In.) | 35 |
| Table Size (L x W) (In.) | 30-1/2 x 22 |
| Table Type | Cast Iron |
PM25330K