Te-Co 64202X Lever Type Plunger - Stainless Steel: Locking Handle, Metric, 1.3"/33.02 mm Stud Length, 1.170"/29.72 mm Thread Len
- Write a review
$36.01
Body Length (B)2.000 in50.80 mmBody MaterialStainless SteelFinal End Force3.75 lbInitial End Force0.75 lbLever Diameter (G)0.141 in3.5814 mmLever Length (F)0.750 in19.00 mmLock TypeYesLocking Element PresentNoNose Diameter (D)0.236 in5.9944 mmProjection Size (C)0.550 in13.97 mmStud Length (H)1.300 in33.02 mmThread Length1.170 in29.72 mmThread Locking Element0Thread Position (I)0.130 in3.30 mmThread Size (A)M10 x 1.50TypeLever Type PlungerVLIER #SFRM10Width Across Flats (E)0.390 in10.00 mm
Specifications
| Body Length (B) | 2.000 in50.80 mm |
| Body Material | Stainless Steel |
| Final End Force | 3.75 lb |
| Initial End Force | 0.75 lb |
| Lever Diameter (G) | 0.141 in3.5814 mm |
| Lever Length (F) | 0.750 in19.00 mm |
| Lock Type | Yes |
| Locking Element Present | No |
| Nose Diameter (D) | 0.236 in5.9944 mm |
| Projection Size (C) | 0.550 in13.97 mm |
| Stud Length (H) | 1.300 in33.02 mm |
| Thread Length | 1.170 in29.72 mm |
| Thread Locking Element | 0 |
| Thread Position (I) | 0.130 in3.30 mm |
| Thread Size (A) | M10 x 1.50 |
| Type | Lever Type Plunger |
| VLIER # | SFRM10 |
| Width Across Flats (E) | 0.390 in10.00 mm |
64202X