KIPP K0339.01410 INDEXING PLUNGER SIZE:4 D1=M20X15 D=10 FORM:A WO. GROOVE WITHOUT LOCKNUT STAINLESS STEEL HARDENED

Material:Steel version:Grub screw and indexing pin steel.Stainless steel version:Indexing pin hardened:Threaded sleeve 1.4305 (AISI 303 equivalent).Indexing pin 1.4034(AISI 420 equivalent).Indexing pin not hardened:Threaded sleeve 1.4305 (AISI 303 equivalent).Indexing pin 1.4305 (AISI 303 equivalent).Mushroom grip black gray thermoplastic.Version:Steel version:Threaded sleeve, black oxidised.Indexing pin hardened, ground and black oxidised.Stainless steel version:Threaded sleeve, bright.Indexing pin hardened, ground and bright.Indexing pin not hardened, ground and bright.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.On request:Special versions.Accessory:Spacer rings K0665