JET 331440 GH-1440B Geared Head Bench Lathe with Stand & Foot Brake
- Write a review
$15,476.00
Carriage Travel (In.)37-2/5Compound Slide Travel (In.)3-1/2Cross Slide Travel (In.)7Height60 inLength76 inLength of Gap (In.)8Max Tool Size (In.)4/5 x 4/5Motor (HP)2 HP, 230V, Single PhaseNumber of Inch Threads34Number of Longitudinal and Cross Feed Rates32/32Number of Metric Threads26Number of Spindle Speeds8Overall Dimensions (L x W x H) (In.)76-13/32 x 29-29/32 x 59-13/16Range of Cross Feeds (IPR)0.007 -0.0187Range of Inch Threads (TPI)4-56Range of Longitudinal Feeds (IPR)0.002 -0.0548Range of Metric Threads0.4-7Range of Spindle Speeds (RPM)70-1900Spindle Bore (In.)2Spindle MountD1-5Spindle Taper with SleeveMT6Steady Rest Capacity (In.)0.31-2.95Swing Over Bed (In.)14Swing Over Cross Slide (In.)8Swing Through Gap (In.)20Tailstock Spindle Travel (In.)4Taper in Tailstock SpindleMT4Weight (Lbs.)1753Width30 inWidth of Bed (In.)7.32
Specifications
| Carriage Travel (In.) | 37-2/5 |
| Compound Slide Travel (In.) | 3-1/2 |
| Cross Slide Travel (In.) | 7 |
| Height | 60 in |
| Length | 76 in |
| Length of Gap (In.) | 8 |
| Max Tool Size (In.) | 4/5 x 4/5 |
| Motor (HP) | 2 HP, 230V, Single Phase |
| Number of Inch Threads | 34 |
| Number of Longitudinal and Cross Feed Rates | 32/32 |
| Number of Metric Threads | 26 |
| Number of Spindle Speeds | 8 |
| Overall Dimensions (L x W x H) (In.) | 76-13/32 x 29-29/32 x 59-13/16 |
| Range of Cross Feeds (IPR) | 0.007 -0.0187 |
| Range of Inch Threads (TPI) | 4-56 |
| Range of Longitudinal Feeds (IPR) | 0.002 -0.0548 |
| Range of Metric Threads | 0.4-7 |
| Range of Spindle Speeds (RPM) | 70-1900 |
| Spindle Bore (In.) | 2 |
| Spindle Mount | D1-5 |
| Spindle Taper with Sleeve | MT6 |
| Steady Rest Capacity (In.) | 0.31-2.95 |
| Swing Over Bed (In.) | 14 |
| Swing Over Cross Slide (In.) | 8 |
| Swing Through Gap (In.) | 20 |
| Tailstock Spindle Travel (In.) | 4 |
| Taper in Tailstock Spindle | MT4 |
| Weight (Lbs.) | 1753 |
| Width | 30 in |
| Width of Bed (In.) | 7.32 |
331440
