- New
JET 690093 JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X Y and Z-Axis Powerfeeds
- Write a review
$20,299.00
Collet Capacity1/8 - 7/8Distance Spindle to Column (Max.) (In.)19Height85 inLength63 inMax Distance Spindle to Table (In.)17-1/2Motor (HP)3 HP, 230/460V, 3PhNumber of Axis3 (Knee)Overall Dimensions (L x W x H) (In.)66 x 63 x 85PowerfeedX, Y and Z-AxisQuill Diameter (In.)3-3/8Quill Down Feed Rates (IPR).0015 - .003 - .006Range of Spindle Speeds (RPM)60 - 4,200Spindle Taper (In. x TPI)R-8Spindle Travel (In.)5Style (Type)Variable Speed R8T-Slot Centers (In.)2-1/2Table Cross Travel (In.)12Table Longitudinal Travel (In.)34Table Longitudinal Travel With Powerfeed (In.)28-3/4Table Size (L x W) (In.)9 x 49Travel of Knee (In.)14-1/2Travel of Ram (In.)13-3/8Weight (Lbs.)2420Width65.5 inWork Table Weight Capacity (Lbs.)660
Specifications
| Collet Capacity | 1/8 - 7/8 |
| Distance Spindle to Column (Max.) (In.) | 19 |
| Height | 85 in |
| Length | 63 in |
| Max Distance Spindle to Table (In.) | 17-1/2 |
| Motor (HP) | 3 HP, 230/460V, 3Ph |
| Number of Axis | 3 (Knee) |
| Overall Dimensions (L x W x H) (In.) | 66 x 63 x 85 |
| Powerfeed | X, Y and Z-Axis |
| Quill Diameter (In.) | 3-3/8 |
| Quill Down Feed Rates (IPR) | .0015 - .003 - .006 |
| Range of Spindle Speeds (RPM) | 60 - 4,200 |
| Spindle Taper (In. x TPI) | R-8 |
| Spindle Travel (In.) | 5 |
| Style (Type) | Variable Speed R8 |
| T-Slot Centers (In.) | 2-1/2 |
| Table Cross Travel (In.) | 12 |
| Table Longitudinal Travel (In.) | 34 |
| Table Longitudinal Travel With Powerfeed (In.) | 28-3/4 |
| Table Size (L x W) (In.) | 9 x 49 |
| Travel of Knee (In.) | 14-1/2 |
| Travel of Ram (In.) | 13-3/8 |
| Weight (Lbs.) | 2420 |
| Width | 65.5 in |
| Work Table Weight Capacity (Lbs.) | 660 |
690093
