JET 323401 GH-1440-3 With Taper Attachment
- Write a review
$20,879.00
Carriage Travel (In.)37-1/2Compound Slide Travel (In.)3-1/2Height56.5 inLength74.8 inLength of Gap (In.)9-3/8Max Tool Size (In.)5/8 x 5/8Motor (HP)3HP, 230/460V, 3PHNumber of Inch Threads40Number of Longitudinal and Cross Feed Rates40Number of Metric Threads23Number of Spindle Speeds12Overall Dimensions (L x W x H) (In.)74-4/5 x 28 x 46Range of Cross Feeds (IPR)0.0004 - 0.0103Range of Inch Threads (TPI)4-112Range of Longitudinal Feeds (IPR)0.0012 - 0.0294Range of Metric Threads0.45-7.5Range of Spindle Speeds (RPM)40-1800Spindle Bore (In.)1-1/2Spindle MountD1-4Spindle Taper with SleeveMT-5Steady Rest Capacity (In.)3-1/2Swing Over Bed (In.)14Swing Over Cross Slide (In.)8-1/5Swing Through Gap (In.)20Tailstock Spindle Travel (In.)4-3/4Taper in Tailstock SpindleMT-3Weight (Lbs.)2336Width30 inWidth of Bed (In.)10-1/5
Specifications
| Carriage Travel (In.) | 37-1/2 |
| Compound Slide Travel (In.) | 3-1/2 |
| Height | 56.5 in |
| Length | 74.8 in |
| Length of Gap (In.) | 9-3/8 |
| Max Tool Size (In.) | 5/8 x 5/8 |
| Motor (HP) | 3HP, 230/460V, 3PH |
| Number of Inch Threads | 40 |
| Number of Longitudinal and Cross Feed Rates | 40 |
| Number of Metric Threads | 23 |
| Number of Spindle Speeds | 12 |
| Overall Dimensions (L x W x H) (In.) | 74-4/5 x 28 x 46 |
| Range of Cross Feeds (IPR) | 0.0004 - 0.0103 |
| Range of Inch Threads (TPI) | 4-112 |
| Range of Longitudinal Feeds (IPR) | 0.0012 - 0.0294 |
| Range of Metric Threads | 0.45-7.5 |
| Range of Spindle Speeds (RPM) | 40-1800 |
| Spindle Bore (In.) | 1-1/2 |
| Spindle Mount | D1-4 |
| Spindle Taper with Sleeve | MT-5 |
| Steady Rest Capacity (In.) | 3-1/2 |
| Swing Over Bed (In.) | 14 |
| Swing Over Cross Slide (In.) | 8-1/5 |
| Swing Through Gap (In.) | 20 |
| Tailstock Spindle Travel (In.) | 4-3/4 |
| Taper in Tailstock Spindle | MT-3 |
| Weight (Lbs.) | 2336 |
| Width | 30 in |
| Width of Bed (In.) | 10-1/5 |
323401
