JET 725000K JPS-10 10" ProShop 1.75 HP 1 PH 115V 30" Fence System Cast Wing w/ Riving Knife
- Write a review
$1,999.99
Arbor Speed (RPM)4000Blade Diameter (In.)10Dust Collection Minimum CFM Required (CFM)350Dust Port Outside Diameter (In.)4Height43 inLength60 inMaximum Depth of Cut (In.)3-1/8Maximum Depth of Cut at 45 Degrees (In.)2-1/8Maximum Diameter of Dado (In.)8Maximum Rip Left of Blade (In.)13-1/2Maximum Rip Right of Blade (In.)30Maximum Width of Dado (In.)13/16Miter Gauge TypeT-Slot with StopsMotor Amps14.8Motor Phase1Motor Power (HP)1-3/4Motor Voltage (V.)115Prewired Voltage (V.)115Recommended Circuit Size (Amps.)20Style (Type)ContractorTable Height from Floor (In.)34-3/4Table in Front of Saw Blade at Maximum Depth of Cut (In.)8.81Table Size (L x W) (In.)20 x 27Table TypeCast IronWidth40 in
Specifications
| Arbor Speed (RPM) | 4000 |
| Blade Diameter (In.) | 10 |
| Dust Collection Minimum CFM Required (CFM) | 350 |
| Dust Port Outside Diameter (In.) | 4 |
| Height | 43 in |
| Length | 60 in |
| Maximum Depth of Cut (In.) | 3-1/8 |
| Maximum Depth of Cut at 45 Degrees (In.) | 2-1/8 |
| Maximum Diameter of Dado (In.) | 8 |
| Maximum Rip Left of Blade (In.) | 13-1/2 |
| Maximum Rip Right of Blade (In.) | 30 |
| Maximum Width of Dado (In.) | 13/16 |
| Miter Gauge Type | T-Slot with Stops |
| Motor Amps | 14.8 |
| Motor Phase | 1 |
| Motor Power (HP) | 1-3/4 |
| Motor Voltage (V.) | 115 |
| Prewired Voltage (V.) | 115 |
| Recommended Circuit Size (Amps.) | 20 |
| Style (Type) | Contractor |
| Table Height from Floor (In.) | 34-3/4 |
| Table in Front of Saw Blade at Maximum Depth of Cut (In.) | 8.81 |
| Table Size (L x W) (In.) | 20 x 27 |
| Table Type | Cast Iron |
| Width | 40 in |
725000K