- New
JET 351146 JMD-40GHPF Geared Head Mill Drill with Power Downfeed & Newall NMS300 2-Axis DRO
- Write a review
$8,139.00
Base Dimensions (In.)24-1/4 x 15-15/16Column Diameter (In.)4-1/2Face Mill Capacity (In.)4Height42.5 inLength28 inMax Distance Spindle to Table (In.)15-3/4Motor (HP)1-1/2HP, 115/230V, 1PhNumber of Spindle Speeds6Overall Dimensions (L x W x H) (In.)29 x 36 x 50Quill Diameter (In.)3Range of Spindle Speeds (RPM)65-1550Spindle Taper (In. x TPI)R8Spindle Travel (In.)5Spindle Travel Auto (In.)4-1/2Swing (In.)21Table Longitudinal Travel (In.)20-1/2Table Size (L x W) (In.)8-1/4 x 28-3/4Weight (Lbs.)721Width39.25 in
Specifications
| Base Dimensions (In.) | 24-1/4 x 15-15/16 |
| Column Diameter (In.) | 4-1/2 |
| Face Mill Capacity (In.) | 4 |
| Height | 42.5 in |
| Length | 28 in |
| Max Distance Spindle to Table (In.) | 15-3/4 |
| Motor (HP) | 1-1/2HP, 115/230V, 1Ph |
| Number of Spindle Speeds | 6 |
| Overall Dimensions (L x W x H) (In.) | 29 x 36 x 50 |
| Quill Diameter (In.) | 3 |
| Range of Spindle Speeds (RPM) | 65-1550 |
| Spindle Taper (In. x TPI) | R8 |
| Spindle Travel (In.) | 5 |
| Spindle Travel Auto (In.) | 4-1/2 |
| Swing (In.) | 21 |
| Table Longitudinal Travel (In.) | 20-1/2 |
| Table Size (L x W) (In.) | 8-1/4 x 28-3/4 |
| Weight (Lbs.) | 721 |
| Width | 39.25 in |
351146
