- New
SKF Bearing LGGB 2/5 DIST GREASES
- Write a review
$219.86
Available for Single Point LubricationyesBase Oil TypeSynthetic esterBase Oil Viscosity DIN 51562 at 100 °C13 mm²/sBase Oil Viscosity DIN 51562 at 40 °C110 mm²/sColourOff whiteDIN 51825 CodeKPE2K-40Dropping Point (min) ISO 2176170 °CEP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N1.8 mmEP Performance - 4 Ball - Weld Load (min.) DIN 51350/42600 NLubrication ability, R2F test B at 120°CPass at 100°CMechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm70NLGI Consistency Class2Oil separation DIN 51817, 40°C, %0.8-3Operating Temperature Range-40-90 °CPack Height261 mmPack Length190 mmPack Width190 mmPacksize5 kg canPenetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm50Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)265 - 295Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C1000 at 100°CShelf Life2 yearSpeed (max.) N X Dm (x 1000)300Suitable for Applications That Require Rust ProtectionΟSuitable for High Load ApplicationsΟSuitable for Vertical Shaft ApplicationsΟThickenerLithium/calcium
Specifications
| Available for Single Point Lubrication | yes |
| Base Oil Type | Synthetic ester |
| Base Oil Viscosity DIN 51562 at 100 °C | 13 mm²/s |
| Base Oil Viscosity DIN 51562 at 40 °C | 110 mm²/s |
| Colour | Off white |
| DIN 51825 Code | KPE2K-40 |
| Dropping Point (min) ISO 2176 | 170 °C |
| EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N | 1.8 mm |
| EP Performance - 4 Ball - Weld Load (min.) DIN 51350/4 | 2600 N |
| Lubrication ability, R2F test B at 120°C | Pass at 100°C |
| Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm | 70 |
| NLGI Consistency Class | 2 |
| Oil separation DIN 51817, 40°C, % | 0.8-3 |
| Operating Temperature Range | -40-90 °C |
| Pack Height | 261 mm |
| Pack Length | 190 mm |
| Pack Width | 190 mm |
| Packsize | 5 kg can |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | 50 |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 265 - 295 |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | 1000 at 100°C |
| Shelf Life | 2 year |
| Speed (max.) N X Dm (x 1000) | 300 |
| Suitable for Applications That Require Rust Protection | Ο |
| Suitable for High Load Applications | Ο |
| Suitable for Vertical Shaft Applications | Ο |
| Thickener | Lithium/calcium |
LGGB 2/5
