SKF LGAF 3E/0.035 Tube of Anti Fretting Paste For Heater
- Write a review
$13.18
Base Oil TypeMineral/SyntheticBase Oil Viscosity DIN 51562 at 100 °C50 mm²/sBase Oil Viscosity DIN 51562 at 40 °C195 mm²/sColourBeigeCopper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C2Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl2-2Corrosion protection, Emcor, ISO 11007, Distilled water0-1DIN 51825 CodeKPE2G-40Dropping Point (min) ISO 2176140 °CEP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N2 mmEP Performance - 4 Ball - Weld Load (min.) DIN 51350/43200 NNLGI Consistency Class2Operating Temperature Range-25-250 °CPack Height130 mmPack Length24 mmPack Width24 mmPacksize35 g tubePenetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm35Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)265-295ThickenerLithiumWater resistance (max.) DIN 51807/1, 3 hrs at 90 °C1
Specifications
| Base Oil Type | Mineral/Synthetic |
| Base Oil Viscosity DIN 51562 at 100 °C | 50 mm²/s |
| Base Oil Viscosity DIN 51562 at 40 °C | 195 mm²/s |
| Colour | Beige |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 2 |
| Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl | 2-2 |
| Corrosion protection, Emcor, ISO 11007, Distilled water | 0-1 |
| DIN 51825 Code | KPE2G-40 |
| Dropping Point (min) ISO 2176 | 140 °C |
| EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N | 2 mm |
| EP Performance - 4 Ball - Weld Load (min.) DIN 51350/4 | 3200 N |
| NLGI Consistency Class | 2 |
| Operating Temperature Range | -25-250 °C |
| Pack Height | 130 mm |
| Pack Length | 24 mm |
| Pack Width | 24 mm |
| Packsize | 35 g tube |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | 35 |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 265-295 |
| Thickener | Lithium |
| Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C | 1 |
LGAF 3E/0.035