- New
SKF Bearing LGET 2/0.05 DIST GREASES
- Write a review
$116.25
Available for Single Point LubricationnoBase Oil TypeSynthetic, PFPEBase Oil Viscosity DIN 51562 at 100 °C38 mm²/sBase Oil Viscosity DIN 51562 at 40 °C400 mm²/sColourOff whiteCopper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C1 max. at 150°CCorrosion protection, Emcor, ISO 11007, Distilled water1-1DIN 51825 CodeKFK2U-40Dropping Point (min) ISO 2176300 °CEP Performance - 4 Ball - Weld Load (min.) DIN 51350/48000 NMechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm+30 at 130°CNLGI Consistency Class2Oil separation DIN 51817, 40°C, %1-3Operating Temperature Range-40-260 °CPack Height30 mmPack Length210 mmPack Width130 mmPacksize50 g (25 ml) syringePenetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)265 - 295Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C1000 at 220°CShelf Life5 yearSpeed (max.) N X Dm (x 1000)300Suitable for Applications That Require Frequent Start-upΟSuitable for Applications with Severe VibrationsΟSuitable for Vertical Shaft ApplicationsΟThickenerPTFE
Specifications
| Available for Single Point Lubrication | no |
| Base Oil Type | Synthetic, PFPE |
| Base Oil Viscosity DIN 51562 at 100 °C | 38 mm²/s |
| Base Oil Viscosity DIN 51562 at 40 °C | 400 mm²/s |
| Colour | Off white |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 1 max. at 150°C |
| Corrosion protection, Emcor, ISO 11007, Distilled water | 1-1 |
| DIN 51825 Code | KFK2U-40 |
| Dropping Point (min) ISO 2176 | 300 °C |
| EP Performance - 4 Ball - Weld Load (min.) DIN 51350/4 | 8000 N |
| Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm | +30 at 130°C |
| NLGI Consistency Class | 2 |
| Oil separation DIN 51817, 40°C, % | 1-3 |
| Operating Temperature Range | -40-260 °C |
| Pack Height | 30 mm |
| Pack Length | 210 mm |
| Pack Width | 130 mm |
| Packsize | 50 g (25 ml) syringe |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 265 - 295 |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | 1000 at 220°C |
| Shelf Life | 5 year |
| Speed (max.) N X Dm (x 1000) | 300 |
| Suitable for Applications That Require Frequent Start-up | Ο |
| Suitable for Applications with Severe Vibrations | Ο |
| Suitable for Vertical Shaft Applications | Ο |
| Thickener | PTFE |
LGET 2/0.05
