- New
SKF Bearing LGWM 2/50 DIST GREASES
- Write a review
$1,988.20
Available for Single Point LubricationnoBase Oil TypeMineral/PAOBase Oil Viscosity DIN 51562 at 100 °C10 mm²/sBase Oil Viscosity DIN 51562 at 40 °C80 mm²/sColourLigth brownCopper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C2 max.DIN 51825 CodeKP2G-40Dropping Point (min) ISO 2176300 °CEP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N2 mmEP Performance - 4 Ball - Weld Load (min.) DIN 51350/44000 NLubrication ability, R2F test B at 120°CPassMechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm30NLGI Consistency Class1-2Oil separation DIN 51817, 40°C, %3 max.Operating Temperature Range-40-110 °CPack Height645 mmPack Length383 mmPack Width351 mmPacksize50 kg drumPenetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm30Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)280-310Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C1000 at 110°CShelf Life5 yearSpeed (max.) N X Dm (x 1000)300Suitable for Vertical Shaft ApplicationsΟThickenerCalcium sulphonate complexWater resistance (max.) DIN 51807/1, 3 hrs at 90 °C1
Specifications
| Available for Single Point Lubrication | no |
| Base Oil Type | Mineral/PAO |
| Base Oil Viscosity DIN 51562 at 100 °C | 10 mm²/s |
| Base Oil Viscosity DIN 51562 at 40 °C | 80 mm²/s |
| Colour | Ligth brown |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 2 max. |
| DIN 51825 Code | KP2G-40 |
| Dropping Point (min) ISO 2176 | 300 °C |
| EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N | 2 mm |
| EP Performance - 4 Ball - Weld Load (min.) DIN 51350/4 | 4000 N |
| Lubrication ability, R2F test B at 120°C | Pass |
| Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm | 30 |
| NLGI Consistency Class | 1-2 |
| Oil separation DIN 51817, 40°C, % | 3 max. |
| Operating Temperature Range | -40-110 °C |
| Pack Height | 645 mm |
| Pack Length | 383 mm |
| Pack Width | 351 mm |
| Packsize | 50 kg drum |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | 30 |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 280-310 |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | 1000 at 110°C |
| Shelf Life | 5 year |
| Speed (max.) N X Dm (x 1000) | 300 |
| Suitable for Vertical Shaft Applications | Ο |
| Thickener | Calcium sulphonate complex |
| Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C | 1 |
LGWM 2/50
