INA RUS38206 Linear roller bearing unit

SpecificationsA52 mmC 8206 mmH38 mmA 241 mmTolerance: +/-0,1C206 mmC 1158 mmC 2102 mmTolerance: +/-0,1C 9172 mmMinimum support lengthH 10,2 mmh 431 mmK 2M8According to DIN 912-12. 9The values apply to screws with a preservative. If there is a possibility of settling, the screws should be secured against rotation. It must be ensured that the adjacent construction has adequate strength. See VDI Guideline 2230.K 3M6According to DIN 912-12. 9The values apply to screws with a preservative. If there is a possibility of settling, the screws should be secured against rotation. It must be ensured that the adjacent construction has adequate strength. See VDI Guideline 2230.L w20 mmt14 mmm2,28 kgMassC305000 NC 0265000 NDIN 3 405-AM6Funnel type lubrication nippleIf the lubrication nipple is replaced by a tube or hose connector, the maximum screw length cannot be more than 6mm.Hole connectors on both sides for either funnel type lubrication nipples to DIN 3405-D6 (supplied loose) or pipe or tube connections. Close off holes with lubrication nipples if no lubrication connectors are to be used.