INA LFKL52ESF Track roller carriage

SpecificationsH 153,8 mmB145 mmL186 mmG 4M10HTotal height of carriage and guideway: H = 60,4 mm For LFS, -C, -CE, -CEE, -E, -EE, -N, -NZZH = 44,3 mm For LFS. . -F, -FEH = 125 mm For LFS. . -MThe guideway LFS. . -M can only be combined with carriages with adjustable clearance. If SF and LFKL carriages are to be used, please contact us firstH 235,3 mmTolerance: +0,3H 324 mmJ B105 mmTolerance: +/-0,2J B190 mmJ L1105 mmJ L2110 mmTolerance: +/-0,2K 210 mmm W2900 gMass of carriageM A40 NmValid for standard design. Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.M A23 NmValid for corrosion-resistant design "RB". Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.The basic load ratings are not valid for "-RB" designs.C y17800 NBasic dynamic load rating in y directionC 0y8900 NBasic static load rating in y directionC z28400 NBasic dynamic load rating in z directionC 0z15500 NBasic static load rating in z directionM x370 NmDynamic moment rating about X axisM 0x180 NmStatic moment rating about X axisM y1490 NmDynamic moment rating about Y axisM 0y800 NmStatic moment rating about Y axisM z930 NmDynamic moment rating about Z axisM 0z460 NmStatic moment rating about Z axisOrdering designation: - Corrosion-resistant design: Carriage: LFCL. . -RBGuideway: LFS. . -RBTrack roller: LFR. . -2RSR-RB- Guideway without holes: LFS. . -OLLFR5301-10-2ZTrack roller usedFor shaft diameter: 10 mmFor ordering of replacement parts, please contact us.LFS52-EThe calculation of basic load ratings and moment ratings is based on the use of this guideway