INA LFKL52SF Track roller carriage

SpecificationsH 146,1 mmB130 mmL136 mmG 4M10HTotal height of carriage and guideway: H = 54,3 mm For LFS, -C, -CE, -CEE, -E, -EE, -N, -NZZH = 38,2 mm For LFS. . -F, -FEH = 118,9 mm For LFS. . -MThe guideway LFS. . -M can only be combined with carriages with adjustable clearance. If SF and LFKL carriages are to be used, please contact us firstH 229,2 mmTolerance: +0,3H 319,4 mmJ B90 mmTolerance: +/-0,2J B183 mmJ L160 mmJ L270 mmTolerance: +/-0,2K 210 mmm W1500 gMass of carriageM A40 NmValid for standard design. Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.M A23 NmValid for corrosion-resistant design "RB". Tightening torque for track roller bolts, concentric bolts are supplied tightened to MA.The basic load ratings are not valid for "-RB" designs.C y10000 NBasic dynamic load rating in y directionC 0y5200 NBasic static load rating in y directionC z16800 NBasic dynamic load rating in z directionC 0z10000 NBasic static load rating in z directionM x210 NmDynamic moment rating about X axisM 0x110 NmStatic moment rating about X axisM y505 NmDynamic moment rating about Y axisM 0y290 NmStatic moment rating about Y axisM z300 NmDynamic moment rating about Z axisM 0z150 NmStatic moment rating about Z axisOrdering designation: - Corrosion-resistant design: Carriage: LFCL. . -RBGuideway: LFS. . -RBTrack roller: LFR. . -2RSR-RB- Guideway without holes: LFS. . -OLLFR5201-10-2ZTrack roller usedFor shaft diameter: 10 mmFor ordering of replacement parts, please contact us.LFS52The calculation of basic load ratings and moment ratings is based on the use of this guideway