Zero Max 210-12 OHLA SAE A 1OP-3/4IP
- Write a review
$253.25
Bearing Type (std)Deep Groove Ball BearingsGrease Fitting(1) Zerk Fitting (press-fit)Housing materialCast ironInput Bore3/4 in with keyway (3/16 in x 3/32 in)Input Bore Depth2.81 inInput pilot depth0.125 in (std); 0.250 in (deep)Input pilot diameter3.250 inInput Pilot Sealing MethodBuna-N GasketInput StandardSAE A 2-Bolt MountMax Grease Capacity1.0 oz.Max Speed (w/o modification)3, 800 RPMMinimum Grease Capacity0.5 oz.Optional Lubrication MethodsContact FactoryOutput pilot diameter3.250 inOutput pilot height0.120 inOutput shaft length2.87 inOutput Type1 in with keyway (1/4 in x 1/8 in)Rec. Grease (typical app.)NLGI #2; Lithium BaseShaft material1144 Stressproof SteelStandard Lubrication MethodGreaseStandard Mounting OrientationShaft Horizontal - Consult Factory for other Mounting Orientations
Specifications
| Bearing Type (std) | Deep Groove Ball Bearings |
| Grease Fitting | (1) Zerk Fitting (press-fit) |
| Housing material | Cast iron |
| Input Bore | 3/4 in with keyway (3/16 in x 3/32 in) |
| Input Bore Depth | 2.81 in |
| Input pilot depth | 0.125 in (std); 0.250 in (deep) |
| Input pilot diameter | 3.250 in |
| Input Pilot Sealing Method | Buna-N Gasket |
| Input Standard | SAE A 2-Bolt Mount |
| Max Grease Capacity | 1.0 oz. |
| Max Speed (w/o modification) | 3, 800 RPM |
| Minimum Grease Capacity | 0.5 oz. |
| Optional Lubrication Methods | Contact Factory |
| Output pilot diameter | 3.250 in |
| Output pilot height | 0.120 in |
| Output shaft length | 2.87 in |
| Output Type | 1 in with keyway (1/4 in x 1/8 in) |
| Rec. Grease (typical app.) | NLGI #2; Lithium Base |
| Shaft material | 1144 Stressproof Steel |
| Standard Lubrication Method | Grease |
| Standard Mounting Orientation | Shaft Horizontal - Consult Factory for other Mounting Orientations |
210-12
