Whitney Tool 15235 Keyseat Milling Cutter, Style 110, 1-1/2" Cut Diameter, 5/64" Cut Width, w/ TiN CoatingKeyseat Milling Cutter
- Write a review
$94.12
CoatingNo CoatingCut Diameter, Inch1-1/2"Cut Diameter, Metric38.1Cut Width5/64"EDP No15235MaterialHigh Speed SteelNeck Diameter0.435Number of Teeth20OD Tolerance0.75Overall Length2-5/64"Shank Dia. Tolerance0Shank Diameter1/2"Shank Length2Shank TypeStraightStyleStyle 110Tooth ConfigurationStraightTypeNarrow Width Slotting CuttersWidth Tolerance0WTC No615005T
Specifications
| Auxiliary lip | No |
| Design | CRW1 |
| Housing bore diameter | 73.03 mm, 2.875 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 6.74 m/s |
| Rotational speed | 3360.0 r/min |
| Seal width | 7.95 mm, 0.313 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 38.1 mm, 1.5 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
15235