Zero Max 1136-13S OVERHUNG LOAD ADAPTOR
- Write a review
$3,246.75
Additional Housing Ports(2) #8 O-Ring BossBearing Type (std)Tapered Roller BearingsGrease Fitting(2) Zerk Fitting (1/4-18 NPT)Housing materialCast ironInput Bore13 tooth 8/16 splineInput Bore Depth3.92 inInput pilot depth0.500 inInput pilot diameter6.000 inInput Pilot Sealing MethodFiber GasketInput StandardSAE D 2 or 4-Bolt MountMax Grease Capacity30 ozMax Speed (w/o modification)2, 500 RPMMinimum Grease Capacity20 oz.Optional Lubrication MethodsContact FactoryOutput pilot diameter6.000 inOutput pilot height0.500 inOutput shaft length5.00 inOutput Type2-1/4 in with keyway (1/2 in x 1/4 in)Rec. Grease (typical app.)NLGI #2; Lithium BaseShaft material1144 Stressproof SteelStandard Lubrication MethodGreaseStandard Mounting OrientationShaft Horizontal - Consult Factory for other Mounting Orientations
Specifications
| Additional Housing Ports | (2) #8 O-Ring Boss |
| Bearing Type (std) | Tapered Roller Bearings |
| Grease Fitting | (2) Zerk Fitting (1/4-18 NPT) |
| Housing material | Cast iron |
| Input Bore | 13 tooth 8/16 spline |
| Input Bore Depth | 3.92 in |
| Input pilot depth | 0.500 in |
| Input pilot diameter | 6.000 in |
| Input Pilot Sealing Method | Fiber Gasket |
| Input Standard | SAE D 2 or 4-Bolt Mount |
| Max Grease Capacity | 30 oz |
| Max Speed (w/o modification) | 2, 500 RPM |
| Minimum Grease Capacity | 20 oz. |
| Optional Lubrication Methods | Contact Factory |
| Output pilot diameter | 6.000 in |
| Output pilot height | 0.500 in |
| Output shaft length | 5.00 in |
| Output Type | 2-1/4 in with keyway (1/2 in x 1/4 in) |
| Rec. Grease (typical app.) | NLGI #2; Lithium Base |
| Shaft material | 1144 Stressproof Steel |
| Standard Lubrication Method | Grease |
| Standard Mounting Orientation | Shaft Horizontal - Consult Factory for other Mounting Orientations |
