Zero Max 515-14S OHLA SAE A 1.50 OP/14T SPL IP
- Write a review
$653.63
Additional Housing Ports(3) 1/4-18 NPT thruBearing Type (std)Tapered Roller BearingsGrease Fitting(1) Zerk Fitting (1/4-18 NPT)Housing materialCast ironInput Bore14 Tooth 12/24 SplineInput Bore Depth2.75 inInput pilot depth0.250 inInput pilot diameter3.250 inInput Pilot Sealing MethodFiber GasketInput StandardSAE A 2 or 4 Bolt Magneto MountMax Grease Capacity4.0 oz.Max Speed (w/o modification)2, 300 RPMMinimum Grease Capacity2.0 oz.Optional Lubrication MethodsContact FactoryOutput pilot diameter3.250 inOutput pilot height0.125 inOutput shaft length2.25 inOutput Type1-1/2 in with keyway (3/8 in x 3/16 in)Rec. Grease (typical app.)NLGI #2; Lithium BaseShaft material1144 Stressproof SteelStandard Lubrication MethodGreaseStandard Mounting OrientationShaft Horizontal - Consult Factory for other Mounting Orientations
Specifications
| Additional Housing Ports | (3) 1/4-18 NPT thru |
| Bearing Type (std) | Tapered Roller Bearings |
| Grease Fitting | (1) Zerk Fitting (1/4-18 NPT) |
| Housing material | Cast iron |
| Input Bore | 14 Tooth 12/24 Spline |
| Input Bore Depth | 2.75 in |
| Input pilot depth | 0.250 in |
| Input pilot diameter | 3.250 in |
| Input Pilot Sealing Method | Fiber Gasket |
| Input Standard | SAE A 2 or 4 Bolt Magneto Mount |
| Max Grease Capacity | 4.0 oz. |
| Max Speed (w/o modification) | 2, 300 RPM |
| Minimum Grease Capacity | 2.0 oz. |
| Optional Lubrication Methods | Contact Factory |
| Output pilot diameter | 3.250 in |
| Output pilot height | 0.125 in |
| Output shaft length | 2.25 in |
| Output Type | 1-1/2 in with keyway (3/8 in x 3/16 in) |
| Rec. Grease (typical app.) | NLGI #2; Lithium Base |
| Shaft material | 1144 Stressproof Steel |
| Standard Lubrication Method | Grease |
| Standard Mounting Orientation | Shaft Horizontal - Consult Factory for other Mounting Orientations |
515-14S
