Enerpac EP3504TI 0.8 gal Usable Oil NEMA 6-15 Plug Electric Hydraulic Torque Wrench Pump
- Write a review
$8,425.00
Current draw (Amps)7Duty cycleExtendedFor use with torque wrenchesFor use with all Enerpac torque wrenchesMax flow at rated pressure imperial32 in3/minMax operating pressure (psi)10,000Motor size (HP)0.85Motor voltage200-250 VOutput flow rate 14 5 psi (in3/min)220Output flow rate 2538 psi (in3/min)130Output flow rate at 5075 psi (in3/min)58Output flow rate load (in3 min)32Output flow rate no load (in3 min)220Pump power sourceElectricPump valve type4-way, 2-positionReservoir capacity (in3)185Sound leveld (Ba)70 - 85Usable oil capacity (in3)185Usable oilcapacity gal0.8Valve operationSolenoidWrenches can operate number1
Specifications
| Current draw (Amps) | 7 |
| Duty cycle | Extended |
| For use with torque wrenches | For use with all Enerpac torque wrenches |
| Max flow at rated pressure imperial | 32 in3/min |
| Max operating pressure (psi) | 10,000 |
| Motor size (HP) | 0.85 |
| Motor voltage | 200-250 V |
| Output flow rate 14 5 psi (in3/min) | 220 |
| Output flow rate 2538 psi (in3/min) | 130 |
| Output flow rate at 5075 psi (in3/min) | 58 |
| Output flow rate load (in3 min) | 32 |
| Output flow rate no load (in3 min) | 220 |
| Pump power source | Electric |
| Pump valve type | 4-way, 2-position |
| Reservoir capacity (in3) | 185 |
| Sound leveld (Ba) | 70 - 85 |
| Usable oil capacity (in3) | 185 |
| Usable oilcapacity gal | 0.8 |
| Valve operation | Solenoid |
| Wrenches can operate number | 1 |
EP3504TI