HPS SH3T0500PB3S D16 SNTL-H 0Deg. 3PH 500kVA 600D-208Y/120V AL 60Hz 150C 3R
- Write a review
$55,870.00
ApprovalCSA, ULDutyGeneral dutyEfficiency regulationDOE 2016 (US), NRCAN 2019 (Canada), NMX 2021 (Mexico)Electrostatic shieldSingleEnclosure dimensions64in/1626mm(H), 49in/1245mm(W), 39in/991mm(D), Typically Built To OrderEnclosure finishANSI 61 grey, UL50Enclosure ground assemblyNoEnclosure IR windowNoEnclosure PN (std)DH6-N3REnclosure typeType 3R / IP24Frequency60HzImpedance (std)4% - 7.5%Insulation class220°CMaterialAluminumNameplateHPS standardNon-linear load (K-factor rating)K13Number of secondariesSinglePhaseThree phasePrimary BIL10kVPrimary connectionDeltaPrimary FCAN (std)2x2.5%Primary FCBN (std)4x2.5%Primary termination (std)Mounting padsPrimary voltage600DRating500 kVASecondary BIL10kVSecondary connectionZig-Zag-NSecondary termination (std)Mounting padsSecondary voltage208Z/120Seismic complianceIBC 2018 (Sds=2.0, z/h=0, lp=1.5)Sentinel harmonic mitigatingK13 3ph 500kVA 600V-208Z/120V 60Hz ALSound level63 dBA (NEMA ST-20)Standard kVA500Temperature rise150°CVector configurationSec 0°
Specifications
| Approval | CSA, UL |
| Duty | General duty |
| Efficiency regulation | DOE 2016 (US), NRCAN 2019 (Canada), NMX 2021 (Mexico) |
| Electrostatic shield | Single |
| Enclosure dimensions | 64in/1626mm(H), 49in/1245mm(W), 39in/991mm(D), Typically Built To Order |
| Enclosure finish | ANSI 61 grey, UL50 |
| Enclosure ground assembly | No |
| Enclosure IR window | No |
| Enclosure PN (std) | DH6-N3R |
| Enclosure type | Type 3R / IP24 |
| Frequency | 60Hz |
| Impedance (std) | 4% - 7.5% |
| Insulation class | 220°C |
| Material | Aluminum |
| Nameplate | HPS standard |
| Non-linear load (K-factor rating) | K13 |
| Number of secondaries | Single |
| Phase | Three phase |
| Primary BIL | 10kV |
| Primary connection | Delta |
| Primary FCAN (std) | 2x2.5% |
| Primary FCBN (std) | 4x2.5% |
| Primary termination (std) | Mounting pads |
| Primary voltage | 600D |
| Rating | 500 kVA |
| Secondary BIL | 10kV |
| Secondary connection | Zig-Zag-N |
| Secondary termination (std) | Mounting pads |
| Secondary voltage | 208Z/120 |
| Seismic compliance | IBC 2018 (Sds=2.0, z/h=0, lp=1.5) |
| Sentinel harmonic mitigating | K13 3ph 500kVA 600V-208Z/120V 60Hz AL |
| Sound level | 63 dBA (NEMA ST-20) |
| Standard kVA | 500 |
| Temperature rise | 150°C |
| Vector configuration | Sec 0° |
SH3T0500PB3S