Hubbell Wiring HBL8400I DUP RCPT HG 20A 250V 6-20R IV
- Write a review
$44.00
Amperage20 AColorIvoryConnectivityBack and Side Wired Screw TerminalsCurrent / amperage rating20 ACurrent rating20 ADielectric strengthWithstands 2,000V minimumDimensions3.28 in x 1.65 in x 1.19 inEnvironmental conditionsIndoor Dry Unless Protected By Additional MeansHeight1.19 inLength3.28 inMaterialThermoplasticMaterial - mounting hardwareScrew MountingMax HP2Nema Rating6-20RNumber of poles2-PoleNumber of wires3-WireOperating temperatureMaximum continuous 75C and minimum -40C without ImpactPhaseSingle phaseStyleFinder Groove FaceTypeReceptacleVoltage250 VACVoltage rating description250 VWattage5000 WWidth (in)1.65Wire size#14 AWG to #10 AWG
Specifications
| Amperage | 20 A |
| Color | Ivory |
| Connectivity | Back and Side Wired Screw Terminals |
| Current / amperage rating | 20 A |
| Current rating | 20 A |
| Dielectric strength | Withstands 2,000V minimum |
| Dimensions | 3.28 in x 1.65 in x 1.19 in |
| Environmental conditions | Indoor Dry Unless Protected By Additional Means |
| Height | 1.19 in |
| Length | 3.28 in |
| Material | Thermoplastic |
| Material - mounting hardware | Screw Mounting |
| Max HP | 2 |
| Nema Rating | 6-20R |
| Number of poles | 2-Pole |
| Number of wires | 3-Wire |
| Operating temperature | Maximum continuous 75C and minimum -40C without Impact |
| Phase | Single phase |
| Style | Finder Groove Face |
| Type | Receptacle |
| Voltage | 250 VAC |
| Voltage rating description | 250 V |
| Wattage | 5000 W |
| Width (in) | 1.65 |
| Wire size | #14 AWG to #10 AWG |
HBL8400I