ABB S203-K2 Miniature Circuit Breaker | S203-K2
- Write a review
$105.89
Accessories availableYesActuator markingI / OActuator materialInsulation Group II, Black, SealableContact position indicationRed ON / Green OFFDielectric test voltage50/60 Hz, 1 min- 2 kVElectrical endurance20000 AC cycleFrequency50 HzHousing materialInsulation Group II, RAL 7035Input voltage typeAC/DCInstallation sizeacc. to DIN 43880 1Mechanical endurance20000 cycleMounting positionanyNumber of protected poles3Operational voltageMaximum (Incl. Tolerance) 440 V ACOvervoltage categoryIIIPower supply connectionArbitraryProduct rangeS200Rated conditional short-circuit current(230 V) 20 kA(400 V) 20 kARated current (In)2 ARated impulse withstand voltage4 kVat 2000 m 5 kVat Sea Level 6.2 kVRated insulation voltageacc. to IEC/EN 60664-1 440 VRated operational voltageacc. to IEC 60898-1 400 V ACacc. to IEC 60947-2 440 V ACRated service short-circuit breaking capacity(230 V AC) 15 kA(400 V AC) 7.5 kA(440 V AC) 7.5 kARated short-circuit capacity(AC) 6 kA(DC) 6 kA(400 V AC) 6 kARated ultimate short-circuit breaking capacity(230 V AC) 20 kA(400 V AC) 10 kA(440 V AC) 10 kARecommended screw driverPozidriv 2Screw terminal typeFailsafe Bi-directional Cylinder-lift TerminalTightening torque2.8 NmTripping characteristicKWire stripping length12.5 mm
Specifications
| Accessories available | Yes |
| Actuator marking | I / O |
| Actuator material | Insulation Group II, Black, Sealable |
| Contact position indication | Red ON / Green OFF |
| Dielectric test voltage | 50/60 Hz, 1 min- 2 kV |
| Electrical endurance | 20000 AC cycle |
| Frequency | 50 Hz |
| Housing material | Insulation Group II, RAL 7035 |
| Input voltage type | AC/DC |
| Installation size | acc. to DIN 43880 1 |
| Mechanical endurance | 20000 cycle |
| Mounting position | any |
| Number of protected poles | 3 |
| Operational voltage | Maximum (Incl. Tolerance) 440 V AC |
| Overvoltage category | III |
| Power supply connection | Arbitrary |
| Product range | S200 |
| Rated conditional short-circuit current | (230 V) 20 kA(400 V) 20 kA |
| Rated current (In) | 2 A |
| Rated impulse withstand voltage | 4 kVat 2000 m 5 kVat Sea Level 6.2 kV |
| Rated insulation voltage | acc. to IEC/EN 60664-1 440 V |
| Rated operational voltage | acc. to IEC 60898-1 400 V ACacc. to IEC 60947-2 440 V AC |
| Rated service short-circuit breaking capacity | (230 V AC) 15 kA(400 V AC) 7.5 kA(440 V AC) 7.5 kA |
| Rated short-circuit capacity | (AC) 6 kA(DC) 6 kA(400 V AC) 6 kA |
| Rated ultimate short-circuit breaking capacity | (230 V AC) 20 kA(400 V AC) 10 kA(440 V AC) 10 kA |
| Recommended screw driver | Pozidriv 2 |
| Screw terminal type | Failsafe Bi-directional Cylinder-lift Terminal |
| Tightening torque | 2.8 Nm |
| Tripping characteristic | K |
| Wire stripping length | 12.5 mm |
