Hubbell Wiring HBL61CM64 MARINE HULL INLET 15A 125V 5-15P GY
- Write a review
$65.14
Amperage15 AColorYellowConnectivityScrew terminalsCord range0.230 in-0.360 in (5.8-18.3)Current / amperage rating15 ACurrent rating15 ADielectric strengthWithstands 2,000V minimumDimensions1.47 in x 1.32 in x 1.47 inEnvironmental conditionsIndoor Dry Unless Protected By Additional MeansHeight1.47 inInsulationInsulated BodyLength1.47 inMaterialThermoplasticMaterial - mounting hardwareScrew MountingMax HP0.50Nema Rating5-15PNumber of poles2-PoleNumber of wires3-WireOperating temperatureMaximum continuous 75C and minimum -40C without ImpactPhaseSingle phaseTemperature rating-40 C w/o impact, -25 with impact.Voltage125 VVoltage rating description125 VWattage1875 WWidth (in)1.32Wire size#14 AWG to #10 AWG
Specifications
| Amperage | 15 A |
| Color | Yellow |
| Connectivity | Screw terminals |
| Cord range | 0.230 in-0.360 in (5.8-18.3) |
| Current / amperage rating | 15 A |
| Current rating | 15 A |
| Dielectric strength | Withstands 2,000V minimum |
| Dimensions | 1.47 in x 1.32 in x 1.47 in |
| Environmental conditions | Indoor Dry Unless Protected By Additional Means |
| Height | 1.47 in |
| Insulation | Insulated Body |
| Length | 1.47 in |
| Material | Thermoplastic |
| Material - mounting hardware | Screw Mounting |
| Max HP | 0.50 |
| Nema Rating | 5-15P |
| Number of poles | 2-Pole |
| Number of wires | 3-Wire |
| Operating temperature | Maximum continuous 75C and minimum -40C without Impact |
| Phase | Single phase |
| Temperature rating | -40 C w/o impact, -25 with impact. |
| Voltage | 125 V |
| Voltage rating description | 125 V |
| Wattage | 1875 W |
| Width (in) | 1.32 |
| Wire size | #14 AWG to #10 AWG |
HBL61CM64