Gates 92932822 745-5M-25 PowerGrip HTD Belts
- Write a review
$50.29
The 745-5M-25 is produced by Gates Rubber and is described as a Gates 92932822 745-5M-25 PowerGrip HTD Belts
Gates 92932822 745-5M-25 PowerGrip HTD Belts The PowerGrip HTD synchronous belt curvilinear tooth form ensures an optimized load distribution leading to high power transmission in low speed and high torque
Benefits
- Durable elastomeric backing protects against environmental pollution as well as frictional wear if power is transmitted from the back of the belt. Fiberglass tensile cord provides the required strength combined with excellent flex life and high resistance to elongation. Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives. Nylon tooth facing provides a durable wear surface for long service life. 30% increase in horsepower ratings, as compared to traditional timing belts. Temperature Range: -30°C to +100°C (-22°F to +212°F). Belts conform to ISO13050:2014. Load capacities up to 1,000 kW. No slippage. High mechanical efficiency. Constant driven speeds. Long trouble-free service life. Perfect fit on HTD profile pulleys. Available in 3M, 5M, 8M, 14M, 20M pitch. Power
- Grip HTD 14M: static conductive to ISO 9563; Directive 2014/34/EU- ATEX compliant. SLIP-FREE HTD. The curvilinear Power
- Grip HTD tooth geometry eliminates stress concentration at tooth roots, allowing for higher power capacity and longer service life, with teeth that mesh smoothly with the pulley grooves to reduce speed variations and prevent belt slippage.
2232988
New
