ABB CT-ERD.12 Time Relay | 1SVR500100R0000
- Write a review
$0.00
Connecting capacityFlexible 1x 0.5 ... 2.5 mmFlexible 2x 0.5 ... 1.5 mmRigid 1x 0.5 ... 4 mmRigid 2x 0.5 ... 1.5 mmDegree of protectionHousing IP50Terminals IP20Mounting position1 ... 6Output1 c/o (SPDT) contactOvervoltage categoryIIIPollution degree3Rated control supply voltage24 ... 240 V AC24 ... 48 V DCRated impulse withstand voltageInput Circuit 4 kVRated insulation voltageInput Circuit / Output Circuit 300 VRated operational current AC-12(230 V) 6 ARated operational current AC-15(230 V) 3 ARated operational current DC-12(24 V) 6 ARated operational current DC-13(24 V) 2 ARecommended screw driverPozidriv 10.8 x 4Short-circuit protective devicesOutput Circuit NC - F Type Fuses 6 AOutput Circuit NO - F Type Fuses 10 ATightening torque0.5 ... 0.8 NmTime range0.05 s ... 100 hTimer relay typeON-DelayWire stripping length7 mm
Specifications
| Connecting capacity | Flexible 1x 0.5 ... 2.5 mmFlexible 2x 0.5 ... 1.5 mmRigid 1x 0.5 ... 4 mmRigid 2x 0.5 ... 1.5 mm |
| Degree of protection | Housing IP50Terminals IP20 |
| Mounting position | 1 ... 6 |
| Output | 1 c/o (SPDT) contact |
| Overvoltage category | III |
| Pollution degree | 3 |
| Rated control supply voltage | 24 ... 240 V AC24 ... 48 V DC |
| Rated impulse withstand voltage | Input Circuit 4 kV |
| Rated insulation voltage | Input Circuit / Output Circuit 300 V |
| Rated operational current AC-12 | (230 V) 6 A |
| Rated operational current AC-15 | (230 V) 3 A |
| Rated operational current DC-12 | (24 V) 6 A |
| Rated operational current DC-13 | (24 V) 2 A |
| Recommended screw driver | Pozidriv 10.8 x 4 |
| Short-circuit protective devices | Output Circuit NC - F Type Fuses 6 AOutput Circuit NO - F Type Fuses 10 A |
| Tightening torque | 0.5 ... 0.8 Nm |
| Time range | 0.05 s ... 100 h |
| Timer relay type | ON-Delay |
| Wire stripping length | 7 mm |
CT-ERD.12
