HPS DM660JJC DIT 660KVA 460-460 CU Drive Isolation Transformers
- Write a review
$35,370.00
ApprovalCSA, ULDrive isolation transformer3ph 660kVA 460V-460Y/266V 60Hz CUDutyGeneral dutyEfficiency regulationNot specified (USA)Enclosure dimensions66in/1677mm(H), 51.5in/1309mm(W), 43in/1093mm(D)Enclosure finishANSI 61 grey, UL50Enclosure IR windowNoEnclosure PN (NPL)NJ3-N3REnclosure typeType 3R / IP24Frequency60HzImpedance (std)5.5% - 7.5%Insulation class220°CMaterialCopperMotor HPNot SelectedNameplateHPS standardNet weight (NPL)3600 lb / 1640 kgNumber of secondaries1 (6-pulse)PhaseThree phasePrimary connectionDeltaPrimary FCAN (NPL)2x2.6%Primary FCBN (NPL)2x2.6%Primary termination (NPL)Mounting padsPrimary voltage460DRating660 kVASecondary connectionWye-NSecondary termination (NPL)Mounting padsSecondary voltage460Y/266Seismic complianceIBC 2018 (Sds=2.0, z/h=0, lp=1.5)Sound level62 dBA (NEMA ST-20)Standard kVA660Temperature rise150°CThermal protective deviceNormally closed (all coils) thermostats with 200°C setpoint, typically built to orderVector configurationDyn1 (-30°)
Specifications
| Approval | CSA, UL |
| Drive isolation transformer | 3ph 660kVA 460V-460Y/266V 60Hz CU |
| Duty | General duty |
| Efficiency regulation | Not specified (USA) |
| Enclosure dimensions | 66in/1677mm(H), 51.5in/1309mm(W), 43in/1093mm(D) |
| Enclosure finish | ANSI 61 grey, UL50 |
| Enclosure IR window | No |
| Enclosure PN (NPL) | NJ3-N3R |
| Enclosure type | Type 3R / IP24 |
| Frequency | 60Hz |
| Impedance (std) | 5.5% - 7.5% |
| Insulation class | 220°C |
| Material | Copper |
| Motor HP | Not Selected |
| Nameplate | HPS standard |
| Net weight (NPL) | 3600 lb / 1640 kg |
| Number of secondaries | 1 (6-pulse) |
| Phase | Three phase |
| Primary connection | Delta |
| Primary FCAN (NPL) | 2x2.6% |
| Primary FCBN (NPL) | 2x2.6% |
| Primary termination (NPL) | Mounting pads |
| Primary voltage | 460D |
| Rating | 660 kVA |
| Secondary connection | Wye-N |
| Secondary termination (NPL) | Mounting pads |
| Secondary voltage | 460Y/266 |
| Seismic compliance | IBC 2018 (Sds=2.0, z/h=0, lp=1.5) |
| Sound level | 62 dBA (NEMA ST-20) |
| Standard kVA | 660 |
| Temperature rise | 150°C |
| Thermal protective device | Normally closed (all coils) thermostats with 200°C setpoint, typically built to order |
| Vector configuration | Dyn1 (-30°) |
DM660JJC
