Hubbell Wiring HBL3524C LKG FLG-INLT 20A 250V/10A 600V 4P5W
- Write a review
$92.64
Amperage20/10 AColorWhiteConnectivityBack Wired Screw TerminalsCurrent / amperage rating20/10 ACurrent rating20 ADielectric strengthWithstands 2,000V minimumDimensions3.06 in x 3.06 in x 2.23 inEnvironmental conditionsIndoor Dry Unless Protected By Additional MeansHeight2.23 inInsulationInsulated BodyLength3.06 inMaterialNylonMaterial - mounting hardwareScrew MountingNema RatingNon-NEMANumber of poles4-PoleNumber of wires5-WireOperating temperatureMaximum continuous 75C and minimum -40C without ImpactPhaseThree phaseTypeFlanged InletVoltage250/600 VACVoltage rating description250/600 VACWidth (in)3.06Wire size#16 AWG to #8 AWG
Specifications
| Amperage | 20/10 A |
| Color | White |
| Connectivity | Back Wired Screw Terminals |
| Current / amperage rating | 20/10 A |
| Current rating | 20 A |
| Dielectric strength | Withstands 2,000V minimum |
| Dimensions | 3.06 in x 3.06 in x 2.23 in |
| Environmental conditions | Indoor Dry Unless Protected By Additional Means |
| Height | 2.23 in |
| Insulation | Insulated Body |
| Length | 3.06 in |
| Material | Nylon |
| Material - mounting hardware | Screw Mounting |
| Nema Rating | Non-NEMA |
| Number of poles | 4-Pole |
| Number of wires | 5-Wire |
| Operating temperature | Maximum continuous 75C and minimum -40C without Impact |
| Phase | Three phase |
| Type | Flanged Inlet |
| Voltage | 250/600 VAC |
| Voltage rating description | 250/600 VAC |
| Width (in) | 3.06 |
| Wire size | #16 AWG to #8 AWG |
HBL3524C