ABB TA200DU-175 Thermal Overload Relay | TA200DU-175
- Write a review
$0.00
Connecting capacity auxiliary circuitFlexible with Ferrule 1/2x 0.75 ... 2.5 mmFlexible 1/2x 0.75 ... 2.5 mmRigid 1/2x 0.75 ... 4 mmConnecting capacity main circuitHole Diameter > 10 mmRigid or Flexible with Cable Lug 1x 25 ... 120 mmConventional free-air thermal currentAuxiliary Circuit NC 5 AAuxiliary Circuit NO 5 ADegree of protectionHousing IP20Main Circuit Terminals IP00Mounting position1 ... 6Number of auxiliary contacts NC1Number of auxiliary contacts NO1Number of protected poles3Pollution degree3Rated impulse withstand voltageAuxiliary Circuit 6 kVMain Circuit 6 kVRated insulation voltage690 VRated operational current (Ie)175 ARated operational voltageAuxiliary Circuit 440 V DCAuxiliary Circuit 500 V ACMain Circuit 690 V ACMain Circuit 440 V DCRecommended screw driverAuxiliary Circuit Pozidriv 1Main Circuit Open BarsSetting range130 ... 175 ASuitable forA145A185AF145AF185AF190AF205Tightening torqueAuxiliary Circuit 1 ... 1.3 NmMain Circuit 25 NmWire stripping lengthAuxiliary Circuit 9 mm
Specifications
| Connecting capacity auxiliary circuit | Flexible with Ferrule 1/2x 0.75 ... 2.5 mmFlexible 1/2x 0.75 ... 2.5 mmRigid 1/2x 0.75 ... 4 mm |
| Connecting capacity main circuit | Hole Diameter > 10 mmRigid or Flexible with Cable Lug 1x 25 ... 120 mm |
| Conventional free-air thermal current | Auxiliary Circuit NC 5 AAuxiliary Circuit NO 5 A |
| Degree of protection | Housing IP20Main Circuit Terminals IP00 |
| Mounting position | 1 ... 6 |
| Number of auxiliary contacts NC | 1 |
| Number of auxiliary contacts NO | 1 |
| Number of protected poles | 3 |
| Pollution degree | 3 |
| Rated impulse withstand voltage | Auxiliary Circuit 6 kVMain Circuit 6 kV |
| Rated insulation voltage | 690 V |
| Rated operational current (Ie) | 175 A |
| Rated operational voltage | Auxiliary Circuit 440 V DCAuxiliary Circuit 500 V ACMain Circuit 690 V ACMain Circuit 440 V DC |
| Recommended screw driver | Auxiliary Circuit Pozidriv 1Main Circuit Open Bars |
| Setting range | 130 ... 175 A |
| Suitable for | A145A185AF145AF185AF190AF205 |
| Tightening torque | Auxiliary Circuit 1 ... 1.3 NmMain Circuit 25 Nm |
| Wire stripping length | Auxiliary Circuit 9 mm |
TA200DU-175
