HPS PH250AR CNTL 250VA 600-12/24 EN Machine Tool Encapsulated Control Transformers
- Write a review
$176.00
ApplicationMachine tool encapsulatedApplication voltage (pri - sec)600 - 12x24ApprovalcULusControl transformer1ph 250VA 600V-12x24V 60Hz CUEnclosure typeCore & coilFrequency60HzInsulation class130°CMaterialCopperNameplateHPS standardNet weight (NPL)8 lb / 3.7 kg, typically stockedOutline ref (NPL)PH-BPhaseSingle phasePrimary connectionSeries (V)Primary FCBN (std)1x8.7%Primary termination (std)Terminal blockPrimary voltage600Rating250 VASecondary connectionParallel x series (Vx2V)Secondary fusingFactory provided, field installed fuse kitSecondary termination (std)Terminal blockSecondary voltage12x24Seismic complianceOSHPD, IBC 2018 (Sds=2.0, z/h=1, lp=1.5)Standard VA250Temperature rise80°CTransformer dimensions3.81in/97mm(H), 4.5in/115mm(W), 5.44in/139mm(D)Transformer mounting (W/D/Size)3.75in/96mm(W), 3.13in/80mm(D), 0.22in/5.59mm X 0.75in/19.05mm(Slot)
Specifications
| Application | Machine tool encapsulated |
| Application voltage (pri - sec) | 600 - 12x24 |
| Approval | cULus |
| Control transformer | 1ph 250VA 600V-12x24V 60Hz CU |
| Enclosure type | Core & coil |
| Frequency | 60Hz |
| Insulation class | 130°C |
| Material | Copper |
| Nameplate | HPS standard |
| Net weight (NPL) | 8 lb / 3.7 kg, typically stocked |
| Outline ref (NPL) | PH-B |
| Phase | Single phase |
| Primary connection | Series (V) |
| Primary FCBN (std) | 1x8.7% |
| Primary termination (std) | Terminal block |
| Primary voltage | 600 |
| Rating | 250 VA |
| Secondary connection | Parallel x series (Vx2V) |
| Secondary fusing | Factory provided, field installed fuse kit |
| Secondary termination (std) | Terminal block |
| Secondary voltage | 12x24 |
| Seismic compliance | OSHPD, IBC 2018 (Sds=2.0, z/h=1, lp=1.5) |
| Standard VA | 250 |
| Temperature rise | 80°C |
| Transformer dimensions | 3.81in/97mm(H), 4.5in/115mm(W), 5.44in/139mm(D) |
| Transformer mounting (W/D/Size) | 3.75in/96mm(W), 3.13in/80mm(D), 0.22in/5.59mm X 0.75in/19.05mm(Slot) |
PH250AR
