HPS TE3A0027NN NRC18 DIT 3 Phase 27kVA 575D-575Y/332V Aluminum 60Hz 3R
- Write a review
$3,420.00
ApprovalCSA, ULDrive isolation transformer3ph 27kVA 575V-575Y/332V 60Hz ALDutyGeneral dutyEfficiency regulationNRCAN 2019 (Canada)Electrostatic shieldSingleEnclosure dimensions28.75in/731mm(H), 25.75in/655mm(W), 23.8in/605mm(D)Enclosure finishANSI 61 grey, UL50Enclosure ground assemblyNoEnclosure IR windowNoEnclosure PN (NPL)DH2-N3REnclosure typeType 3R / IP24Frequency60HzImpedance (std)2.5% - 6.5%Insulation class220°CMaterialAluminumMotor HPNot SelectedNameplateHPS standardNet weight (NPL)280 lb / 128 kgNumber of secondaries1 (6-pulse)PhaseThree phasePrimary BIL10kVPrimary connectionDeltaPrimary FCAN (NPL)2x2.5%Primary FCBN (NPL)2x2.5%Primary termination (NPL)Mechanical lugsPrimary voltage575DRating27 kVASecondary BIL10kVSecondary connectionWye-NSecondary termination (NPL)Mechanical lugsSecondary voltage575Y/332Seismic complianceIBC 2018 (Sds=2.0, z/h=0, lp=1.5)Sound level45 dBA (NEMA ST-20)Standard kVA27Temperature rise150°CThermal protective deviceNormally closed (all coils) thermostats with 200°C setpoint, typically built to orderVector configurationDyn1 (-30°)
Specifications
| Approval | CSA, UL |
| Drive isolation transformer | 3ph 27kVA 575V-575Y/332V 60Hz AL |
| Duty | General duty |
| Efficiency regulation | NRCAN 2019 (Canada) |
| Electrostatic shield | Single |
| Enclosure dimensions | 28.75in/731mm(H), 25.75in/655mm(W), 23.8in/605mm(D) |
| Enclosure finish | ANSI 61 grey, UL50 |
| Enclosure ground assembly | No |
| Enclosure IR window | No |
| Enclosure PN (NPL) | DH2-N3R |
| Enclosure type | Type 3R / IP24 |
| Frequency | 60Hz |
| Impedance (std) | 2.5% - 6.5% |
| Insulation class | 220°C |
| Material | Aluminum |
| Motor HP | Not Selected |
| Nameplate | HPS standard |
| Net weight (NPL) | 280 lb / 128 kg |
| Number of secondaries | 1 (6-pulse) |
| Phase | Three phase |
| Primary BIL | 10kV |
| Primary connection | Delta |
| Primary FCAN (NPL) | 2x2.5% |
| Primary FCBN (NPL) | 2x2.5% |
| Primary termination (NPL) | Mechanical lugs |
| Primary voltage | 575D |
| Rating | 27 kVA |
| Secondary BIL | 10kV |
| Secondary connection | Wye-N |
| Secondary termination (NPL) | Mechanical lugs |
| Secondary voltage | 575Y/332 |
| Seismic compliance | IBC 2018 (Sds=2.0, z/h=0, lp=1.5) |
| Sound level | 45 dBA (NEMA ST-20) |
| Standard kVA | 27 |
| Temperature rise | 150°C |
| Thermal protective device | Normally closed (all coils) thermostats with 200°C setpoint, typically built to order |
| Vector configuration | Dyn1 (-30°) |
TE3A0027NN