Hubbell Wiring HBL2625SW LKG WT S/SHRD FLG-INLT 30A 250V L6-30P
- Write a review
$150.00
Amperage30 AColorGrayConnectivityBack Wired Screw TerminalsCurrent / amperage rating30 ACurrent rating30 ADielectric strengthWithstands 2,000V minimumDimensions3.75 in x 3.75 in x 2.27 inEnvironmental conditionsWatertightHeight2.27 inIndustry Standard(s)UL Listed, CSA Certified To Type 4, 4X And Type 12InsulationInsulated BodyLength3.75 inMaterialThermoplasticMaterial - mounting hardwareScrew MountingNema RatingL6-30PNumber of poles2-PoleNumber of wires3-WireOperating temperatureMaximum continuous 75C and minimum -40C without ImpactPhaseSingle phaseTypeFlanged InletVoltage250 VACVoltage rating description250 VWidth (in)3.75Wire size#16 AWG to #8 AWG
Specifications
| Amperage | 30 A |
| Color | Gray |
| Connectivity | Back Wired Screw Terminals |
| Current / amperage rating | 30 A |
| Current rating | 30 A |
| Dielectric strength | Withstands 2,000V minimum |
| Dimensions | 3.75 in x 3.75 in x 2.27 in |
| Environmental conditions | Watertight |
| Height | 2.27 in |
| Industry Standard(s) | UL Listed, CSA Certified To Type 4, 4X And Type 12 |
| Insulation | Insulated Body |
| Length | 3.75 in |
| Material | Thermoplastic |
| Material - mounting hardware | Screw Mounting |
| Nema Rating | L6-30P |
| Number of poles | 2-Pole |
| Number of wires | 3-Wire |
| Operating temperature | Maximum continuous 75C and minimum -40C without Impact |
| Phase | Single phase |
| Type | Flanged Inlet |
| Voltage | 250 VAC |
| Voltage rating description | 250 V |
| Width (in) | 3.75 |
| Wire size | #16 AWG to #8 AWG |
HBL2625SW
