Baldor MR14010 2.5HP 2400RPM DC TEFC DBL SHAFT
- Write a review
$530.11
Agency ApprovalsURAgency approvalsURAmbient Temperature40°CAmbient temperature (°C)40Armature Current12.0aArmature current12.0 aArmature Inertia13.657LI²Armature inertia13.657 LI²Armature Resistance1.249ohmsArmature resistance1.249 ohmsArmature Voltage180VArmature voltage180 VBase IndicatorNoMountingBase indicatorNo mountingBase Speed2400rpmBase speed2400 rpmBearing Grease TypeNyogel756GBearing grease typeNyogel 756GDrip CoverNoDripCoverDrip coverNo drip coverDuty RatingCONTDuty ratingCONTEnclosureTEFCFeedback DeviceNOFEEDBACKFeedback deviceNo feedbackFrame143TZFrame MaterialSteelFrame materialSteelHeater IndicatorNoHeaterHeater indicatorNo heaterInsulation ClassFInsulation classFLifting LugsNoLiftingLugsLifting lugsNo lifting lugsMotor Lead ExitKoBoxMotor lead exitKo boxMotor Lead Quantity/Wire Size2@14AWGMotor lead quantity/wire size2 @ 14 AWGMotor Lead TerminationFlyingLeadsWithQCMotor lead terminationFlying Leads With QCMotor StandardsNEMAMotor standardsNEMAMounting ArrangementOTHERMounting arrangementOTHEROutput Power2.500HPOutput power2.500 HPOverall Length14.43 inProduct FamilyGeneralPurposeProduct familyGeneral PurposePulley End Bearing TypeSealedBearingPulley end bearing typeSealed bearingRoHS StatusROHSCOMPLIANTRoHS statusROHS compliantService Factor1Service factor1.00Shaft Diameter0.625 inShaft Extension LocationPulleyEndShaft extension locationPulley endShaft Ground IndicatorNoShaftGroundingShaft ground indicatorNo shaft groundingShaft RotationReversibleShaft rotationReversibleShaft Slinger IndicatorNoSlingerShaft slinger indicatorNo slingerXP Class and GroupNoneXP DivisionNotApplicableXP divisionNot applicable
Specifications
| Agency Approvals | UR |
| Agency approvals | UR |
| Ambient Temperature | 40°C |
| Ambient temperature (°C) | 40 |
| Armature Current | 12.0a |
| Armature current | 12.0 a |
| Armature Inertia | 13.657LI² |
| Armature inertia | 13.657 LI² |
| Armature Resistance | 1.249ohms |
| Armature resistance | 1.249 ohms |
| Armature Voltage | 180V |
| Armature voltage | 180 V |
| Base Indicator | NoMounting |
| Base indicator | No mounting |
| Base Speed | 2400rpm |
| Base speed | 2400 rpm |
| Bearing Grease Type | Nyogel756G |
| Bearing grease type | Nyogel 756G |
| Drip Cover | NoDripCover |
| Drip cover | No drip cover |
| Duty Rating | CONT |
| Duty rating | CONT |
| Enclosure | TEFC |
| Feedback Device | NOFEEDBACK |
| Feedback device | No feedback |
| Frame | 143TZ |
| Frame Material | Steel |
| Frame material | Steel |
| Heater Indicator | NoHeater |
| Heater indicator | No heater |
| Insulation Class | F |
| Insulation class | F |
| Lifting Lugs | NoLiftingLugs |
| Lifting lugs | No lifting lugs |
| Motor Lead Exit | KoBox |
| Motor lead exit | Ko box |
| Motor Lead Quantity/Wire Size | 2@14AWG |
| Motor lead quantity/wire size | 2 @ 14 AWG |
| Motor Lead Termination | FlyingLeadsWithQC |
| Motor lead termination | Flying Leads With QC |
| Motor Standards | NEMA |
| Motor standards | NEMA |
| Mounting Arrangement | OTHER |
| Mounting arrangement | OTHER |
| Output Power | 2.500HP |
| Output power | 2.500 HP |
| Overall Length | 14.43 in |
| Product Family | GeneralPurpose |
| Product family | General Purpose |
| Pulley End Bearing Type | SealedBearing |
| Pulley end bearing type | Sealed bearing |
| RoHS Status | ROHSCOMPLIANT |
| RoHS status | ROHS compliant |
| Service Factor | 1 |
| Service factor | 1.00 |
| Shaft Diameter | 0.625 in |
| Shaft Extension Location | PulleyEnd |
| Shaft extension location | Pulley end |
| Shaft Ground Indicator | NoShaftGrounding |
| Shaft ground indicator | No shaft grounding |
| Shaft Rotation | Reversible |
| Shaft rotation | Reversible |
| Shaft Slinger Indicator | NoSlinger |
| Shaft slinger indicator | No slinger |
| XP Class and Group | None |
| XP Division | NotApplicable |
| XP division | Not applicable |
MR14010
