Fasco D966 71264161 Motor, 5.63" Diameter, 1/3 HP, 1 SpeedD966 71264161 Motor5.63" Diameter, 1/3 HP, 1 Speed
- Write a review
$297.27
Ambient temperature (°C)60CENCountry of originMexicoCSAYDrive end bearingBallDutyContinuous air overElectrical typePermanent split capacitorFrame48Frame length5.07 inFrame MaterialRolled steelFrequency60 HzInsulation classBMotor orientationAnyMountingExtended studsNumber of speeds1Opp drive end bearingBallOutput HP1/2 HPOutput KW0.37 kWOverall Length11.81 inPackaged height6.02 inPackaged length15 inPackaged width6.04 inPoles8RotationReversibleService factor1Shaft diameter0.500 inShaft extension6.00 inShaft typeDouble flatSpeed825 RPMThermal protectionThermally protectedULRecognized
Specifications
| Ambient temperature (°C) | 60 |
| CE | N |
| Country of origin | Mexico |
| CSA | Y |
| Drive end bearing | Ball |
| Duty | Continuous air over |
| Electrical type | Permanent split capacitor |
| Frame | 48 |
| Frame length | 5.07 in |
| Frame Material | Rolled steel |
| Frequency | 60 Hz |
| Insulation class | B |
| Motor orientation | Any |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Ball |
| Output HP | 1/2 HP |
| Output KW | 0.37 kW |
| Overall Length | 11.81 in |
| Packaged height | 6.02 in |
| Packaged length | 15 in |
| Packaged width | 6.04 in |
| Poles | 8 |
| Rotation | Reversible |
| Service factor | 1 |
| Shaft diameter | 0.500 in |
| Shaft extension | 6.00 in |
| Shaft type | Double flat |
| Speed | 825 RPM |
| Thermal protection | Thermally protected |
| UL | Recognized |
D966