Fasco D919 Condenser Fan Motor, 1/8 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, TEAOD919 Condenser Fan Motor1/8 HP,
- Write a review
$164.76
Ambient temperature (°C)40Amperage0.79CENCountry of OriginThailandCountry of originThailandCSAYCurrent0.79 ADrive end bearingSleeveDutyContinuousElectrical typePermanent split capacitorEnclosureTotally enclosed air overFASCO7126-3557Frame48Frame length3.74 inFrame MaterialRolled steelFrame materialRolled steelFrequency60 HzInsulation classBKW0.10MountingExtended studsNumber of speeds1Opp drive end bearingSleeveOutput HP1/8 HPOutput KW0.10 kWPackaged height5.63 inPackaged length15 inPackaged width5.63 inPhase1Poles6RotationReversibleService factor1Shaft diameter0.500 inShaft Diameter0.500 inShaft extension6.0 inShaft typeDouble flatSpeed1075 RPMStarting methodAcross the lineThermal protectionAutomaticULRecognizedVoltage208-230 V
Specifications
| Ambient temperature (°C) | 40 |
| Amperage | 0.79 |
| CE | N |
| Country of Origin | Thailand |
| Country of origin | Thailand |
| CSA | Y |
| Current | 0.79 A |
| Drive end bearing | Sleeve |
| Duty | Continuous |
| Electrical type | Permanent split capacitor |
| Enclosure | Totally enclosed air over |
| FASCO | 7126-3557 |
| Frame | 48 |
| Frame length | 3.74 in |
| Frame Material | Rolled steel |
| Frame material | Rolled steel |
| Frequency | 60 Hz |
| Insulation class | B |
| KW | 0.10 |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/8 HP |
| Output KW | 0.10 kW |
| Packaged height | 5.63 in |
| Packaged length | 15 in |
| Packaged width | 5.63 in |
| Phase | 1 |
| Poles | 6 |
| Rotation | Reversible |
| Service factor | 1 |
| Shaft diameter | 0.500 in |
| Shaft Diameter | 0.500 in |
| Shaft extension | 6.0 in |
| Shaft type | Double flat |
| Speed | 1075 RPM |
| Starting method | Across the line |
| Thermal protection | Automatic |
| UL | Recognized |
| Voltage | 208-230 V |
D919