- New
Fasco D895 OEM Replacement Motor, 1/8 HP, 1 Ph, 60 Hz, 200-230 V, 1650 RPM, 1 Speed, 48 Frame, TEAOD895 OEM Replacement Motor1/8
- Write a review
$170.18
Ambient temperature (°C)60Amperage0.72CENCountry of originThailandCSAYCurrent0.72 ADrive end bearingSleeveDutyContinuousElectrical typePermanent split capacitorEnclosureTotally enclosed air overFrame48Frame length3.54 inFrame MaterialRolled steelFrame materialRolled steelFrequency60 HzGE5KCP39BGR426XInsulation classBMountingExtended studsNumber of speeds1Opp drive end bearingSleeveOutput HP1/8 HPOutput KW0.10 kWPackaged height5.63 inPackaged length15 inPackaged width5.63 inPhase1Poles4Replaced ByOTR1004RotationClockwise shaft endService factor1Shaft diameter0.500 inShaft Diameter0.500 inShaft extension2.0 inShaft typeFlatSpeed1650 RPMStarting methodAcross the lineThermal protectionAutomaticULRecognizedVoltage200-230 V
Specifications
| Ambient temperature (°C) | 60 |
| Amperage | 0.72 |
| CE | N |
| Country of origin | Thailand |
| CSA | Y |
| Current | 0.72 A |
| Drive end bearing | Sleeve |
| Duty | Continuous |
| Electrical type | Permanent split capacitor |
| Enclosure | Totally enclosed air over |
| Frame | 48 |
| Frame length | 3.54 in |
| Frame Material | Rolled steel |
| Frame material | Rolled steel |
| Frequency | 60 Hz |
| GE | 5KCP39BGR426X |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/8 HP |
| Output KW | 0.10 kW |
| Packaged height | 5.63 in |
| Packaged length | 15 in |
| Packaged width | 5.63 in |
| Phase | 1 |
| Poles | 4 |
| Replaced By | OTR1004 |
| Rotation | Clockwise shaft end |
| Service factor | 1 |
| Shaft diameter | 0.500 in |
| Shaft Diameter | 0.500 in |
| Shaft extension | 2.0 in |
| Shaft type | Flat |
| Speed | 1650 RPM |
| Starting method | Across the line |
| Thermal protection | Automatic |
| UL | Recognized |
| Voltage | 200-230 V |
D895
