Agency ApprovalsCEAmbient Temperature40°CArmature Current7.6aArmature Inductance7.1mHArmature Inertia10.93LI²Armature Resistance0.7344ohmsArmature Voltage90VBase IndicatorRigidBase Speed1750rpmBearing Grease TypePolyrexEM(-20F+300F)Drip CoverNoDripCoverDuty RatingCONTEnclosureTEFCFeedback DeviceNOFEEDBACKFrame56CHaz Area Class and GroupNoneHaz Area DivisionNotApplicableHeater IndicatorNoHeaterInsulation ClassFLifting LugsNoLiftingLugsMotor Lead ExitKoBoxMotor Lead Quantity/Wire Size2@14AWGMotor Lead TerminationFlyingLeadsMotor StandardsNEMAMounting ArrangementF1Output Power0.750HPOverall Length14.59INProduct FamilyGeneralPurposePulley End Bearing TypeSealedBearingRoHS StatusROHSCOMPLIANTService Factor1Shaft Diameter0.625INShaft Extension LocationPulleyEndShaft Ground IndicatorNoShaftGroundingShaft RotationReversibleShaft Slinger IndicatorNoSlinger
| Agency Approvals | CE |
| Ambient Temperature | 40°C |
| Armature Current | 7.6a |
| Armature Inductance | 7.1mH |
| Armature Inertia | 10.93LI² |
| Armature Resistance | 0.7344ohms |
| Armature Voltage | 90V |
| Base Indicator | Rigid |
| Base Speed | 1750rpm |
| Bearing Grease Type | PolyrexEM(-20F+300F) |
| Drip Cover | NoDripCover |
| Duty Rating | CONT |
| Enclosure | TEFC |
| Feedback Device | NOFEEDBACK |
| Frame | 56C |
| Haz Area Class and Group | None |
| Haz Area Division | NotApplicable |
| Heater Indicator | NoHeater |
| Insulation Class | F |
| Lifting Lugs | NoLiftingLugs |
| Motor Lead Exit | KoBox |
| Motor Lead Quantity/Wire Size | 2@14AWG |
| Motor Lead Termination | FlyingLeads |
| Motor Standards | NEMA |
| Mounting Arrangement | F1 |
| Output Power | 0.750HP |
| Overall Length | 14.59IN |
| Product Family | GeneralPurpose |
| Pulley End Bearing Type | SealedBearing |
| RoHS Status | ROHSCOMPLIANT |
| Service Factor | 1 |
| Shaft Diameter | 0.625IN |
| Shaft Extension Location | PulleyEnd |
| Shaft Ground Indicator | NoShaftGrounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | NoSlinger |