- New
Fasco D1124 OEM Replacement Motor, 1/20 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAOD1124 OEM Replacement Motor
- Write a review
$107.03
Ambient temperature (°C)40CENCountry of originMexicoCSAYCurrent2.10 ADrive end bearingSleeveDutyAir overElectrical typeShaded poleEnclosureOpen air overFASCO7163-3181Frame3.3Frame length2.82 inFrame MaterialSteelFrame materialSteelFRANKLIN8354310160Frequency60 HzGE5KSM59JSK143XGRAINGER/DAYTON32NA49Insulation classBMountingExtended studsNumber of speeds1Opp drive end bearingSleeveOutput HP1/20 HPOutput KW0.04 kWOverall Length6.37 inPackaged height3.38 inPackaged length8 inPackaged width3.38 inPhase1Poles4RotationClockwise shaft endRPM1500Service factor1Shaft diameter0.313 inShaft Diameter0.313 inShaft extension3 inShaft typeFlatSpeed1550 RPMStarting methodAcross the lineThermal protectionThermally protectedULRecognizedVoltage115 V
Specifications
| Ambient temperature (°C) | 40 |
| CE | N |
| Country of origin | Mexico |
| CSA | Y |
| Current | 2.10 A |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Electrical type | Shaded pole |
| Enclosure | Open air over |
| FASCO | 7163-3181 |
| Frame | 3.3 |
| Frame length | 2.82 in |
| Frame Material | Steel |
| Frame material | Steel |
| FRANKLIN | 8354310160 |
| Frequency | 60 Hz |
| GE | 5KSM59JSK143X |
| GRAINGER/DAYTON | 32NA49 |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/20 HP |
| Output KW | 0.04 kW |
| Overall Length | 6.37 in |
| Packaged height | 3.38 in |
| Packaged length | 8 in |
| Packaged width | 3.38 in |
| Phase | 1 |
| Poles | 4 |
| Rotation | Clockwise shaft end |
| RPM | 1500 |
| Service factor | 1 |
| Shaft diameter | 0.313 in |
| Shaft Diameter | 0.313 in |
| Shaft extension | 3 in |
| Shaft type | Flat |
| Speed | 1550 RPM |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 115 V |
D1124
