Fasco D534 OEM Replacement Motor, 1/35-1/110 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 2 Speed, 3.3" Diameter, TEAOD534 OEM Replacement
- Write a review
$143.67
Ambient temperature (°C)40Amperage1.50/0.50CENCountry of originMexicoCSAYCurrent1.50/0.50 ADrive end bearingSleeveDutyAir overElectrical typeShaded poleEnclosureTotally enclosed air overFrame3.3Frame length2.32 inFrame MaterialSteelFrame materialSteelFrequency60 HzHP1/35-1/110Insulation classBMountingExtended studsNumber of speeds2Opp drive end bearingSleeveOutput HP1/35-1/110 HPOutput KW0.02 kWOverall Length4.13 inPackaged height3.38 inPackaged length8 inPackaged width3.38 inPhase1Poles4RotationClockwise shaft endService factor1Shaft diameter0.250 inShaft Diameter0.250 inShaft extension1 inShaft typeFlatSpeed1500 RPMStarting methodAcross the lineThermal protectionThermally protectedULRecognizedVoltage115 V
Specifications
| Ambient temperature (°C) | 40 |
| Amperage | 1.50/0.50 |
| CE | N |
| Country of origin | Mexico |
| CSA | Y |
| Current | 1.50/0.50 A |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Electrical type | Shaded pole |
| Enclosure | Totally enclosed air over |
| Frame | 3.3 |
| Frame length | 2.32 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 60 Hz |
| HP | 1/35-1/110 |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 2 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/35-1/110 HP |
| Output KW | 0.02 kW |
| Overall Length | 4.13 in |
| Packaged height | 3.38 in |
| Packaged length | 8 in |
| Packaged width | 3.38 in |
| Phase | 1 |
| Poles | 4 |
| Rotation | Clockwise shaft end |
| Service factor | 1 |
| Shaft diameter | 0.250 in |
| Shaft Diameter | 0.250 in |
| Shaft extension | 1 in |
| Shaft type | Flat |
| Speed | 1500 RPM |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 115 V |
D534