Fasco D1125 OEM Replacement Motor, 1/20 / 1/15 HP, 1 Ph, 50 Hz, 208-230 V, 1400/1550 RPM, 1 Speed, 3.3" Diameter, OAOD1125 OEM R
- Write a review
$90.55
Ambient temperature (°C)40CENCountry of originMexicoCSANCurrent0.40/0.50 ADrive end bearingSleeveDutyAir overElectrical typePermanent split capacitorEnclosureOpen air overFASCO7090-0442Frame3.3Frame length3.62 inFrame MaterialSteelFrame materialSteelFrequency50 HzHP1/20 / 1/15Insulation classBMountingExtended studsNumber of speeds1Opp drive end bearingSleeveOutput HP1/20 / 1/15 HPOutput KW0.04 kWOverall Length6.75 inPackaged height5 inPackaged length8 inPackaged width5.63 inPhase1Poles4RotationCounterclockwise shaft endRPM1500Service factor1Shaft diameter0.313 inShaft Diameter0.313 inShaft extension2.64 inShaft typeFlatSpeed1400/1550 RPMStarting methodAcross the lineThermal protectionThermally protectedULRecognizedVoltage208-230 V
Specifications
| Ambient temperature (°C) | 40 |
| CE | N |
| Country of origin | Mexico |
| CSA | N |
| Current | 0.40/0.50 A |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Electrical type | Permanent split capacitor |
| Enclosure | Open air over |
| FASCO | 7090-0442 |
| Frame | 3.3 |
| Frame length | 3.62 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 50 Hz |
| HP | 1/20 / 1/15 |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/20 / 1/15 HP |
| Output KW | 0.04 kW |
| Overall Length | 6.75 in |
| Packaged height | 5 in |
| Packaged length | 8 in |
| Packaged width | 5.63 in |
| Phase | 1 |
| Poles | 4 |
| Rotation | Counterclockwise shaft end |
| RPM | 1500 |
| Service factor | 1 |
| Shaft diameter | 0.313 in |
| Shaft Diameter | 0.313 in |
| Shaft extension | 2.64 in |
| Shaft type | Flat |
| Speed | 1400/1550 RPM |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 208-230 V |
D1125