Fasco D412 Draft Inducer Motor, 1/9 HP, 1 Ph, 60 Hz, 230 V, 3000/2500 RPM, 1 Speed, 3.3" Diameter, OAOD412 Draft Inducer Motor1/
- Write a review
$378.37
Ambient temperature (°C)40Amperage0.7CENCountry of originMexicoCSAYCurrent0.7 ADrive end bearingBallDutyAir overElectrical typePermanent split capacitorEnclosureOpen air overFrame3.3Frame length4.50 inFrame MaterialSteelFrame materialSteelFrequency60 HzHP1/9Insulation classBKW0.08MountingExtended studsNumber of speeds1Opp drive end bearingBallOutput HP1/9 HPOutput KW0.08 kWOverall Length10.57 inPackaged height4.56 inPackaged length13 inPackaged width5.5 inPhase1Poles2RotationReversibleRPM3000Service factor1Shaft diameter0.250 inShaft Diameter0.250 inShaft extension3.80 inShaft typeFlatSpeed3000/2500 rpmStarting methodAcross the lineThermal protectionThermally protectedULRecognizedVoltage230 V
Specifications
| Ambient temperature (°C) | 40 |
| Amperage | 0.7 |
| CE | N |
| Country of origin | Mexico |
| CSA | Y |
| Current | 0.7 A |
| Drive end bearing | Ball |
| Duty | Air over |
| Electrical type | Permanent split capacitor |
| Enclosure | Open air over |
| Frame | 3.3 |
| Frame length | 4.50 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 60 Hz |
| HP | 1/9 |
| Insulation class | B |
| KW | 0.08 |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Ball |
| Output HP | 1/9 HP |
| Output KW | 0.08 kW |
| Overall Length | 10.57 in |
| Packaged height | 4.56 in |
| Packaged length | 13 in |
| Packaged width | 5.5 in |
| Phase | 1 |
| Poles | 2 |
| Rotation | Reversible |
| RPM | 3000 |
| Service factor | 1 |
| Shaft diameter | 0.250 in |
| Shaft Diameter | 0.250 in |
| Shaft extension | 3.80 in |
| Shaft type | Flat |
| Speed | 3000/2500 rpm |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 230 V |
D412