Fasco D832 OEM Replacement Motor, 1/8 HP, 1 Ph, 60 Hz, 208-230 V, 825 RPM, 1 Speed, 48 Frame, TEAOD832 OEM Replacement Motor1/8
- Write a review
$176.87
Ambient temperature (°C)40CENCountry of originMexicoCSAYCurrent1.10 ADrive end bearingBallDutyContinuous air overElectrical typePermanent split capacitorEnclosureTotally enclosed air overFrame48Frame length3.57 inFrame MaterialRolled steelFrame materialRolled steelFrequency60 HzInsulation classBMotor orientationAnyMountingExtended studsNumber of speeds1Opp drive end bearingBallOutput HP1/8 HPOutput KW0.10 kWOverall Length9.06 inPackaged height6.02 inPackaged length14.24 inPackaged width6.04 inPhase1Poles8RotationCounterclockwise/clockwiseService factor1Shaft diameter0.500 inShaft Diameter0.500 inShaft extension4.75 inShaft typeDouble flatSpeed825 RPMThermal protectionThermally protectedULRecognizedVoltage208-230 V
Specifications
| Ambient temperature (°C) | 40 |
| CE | N |
| Country of origin | Mexico |
| CSA | Y |
| Current | 1.10 A |
| Drive end bearing | Ball |
| Duty | Continuous air over |
| Electrical type | Permanent split capacitor |
| Enclosure | Totally enclosed air over |
| Frame | 48 |
| Frame length | 3.57 in |
| Frame Material | Rolled steel |
| Frame material | Rolled steel |
| Frequency | 60 Hz |
| Insulation class | B |
| Motor orientation | Any |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Ball |
| Output HP | 1/8 HP |
| Output KW | 0.10 kW |
| Overall Length | 9.06 in |
| Packaged height | 6.02 in |
| Packaged length | 14.24 in |
| Packaged width | 6.04 in |
| Phase | 1 |
| Poles | 8 |
| Rotation | Counterclockwise/clockwise |
| Service factor | 1 |
| Shaft diameter | 0.500 in |
| Shaft Diameter | 0.500 in |
| Shaft extension | 4.75 in |
| Shaft type | Double flat |
| Speed | 825 RPM |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 208-230 V |
D832