Fasco D783 OEM Replacement Motor, 1/4 HP, 1 Ph, 60 Hz, 208-230 V, 1625 RPM, 1 Speed, 48 Frame, ODPD783 OEM Replacement Motor1/4
- Write a review
$174.17
Ambient temperature (°C)40Amperage1.58CENCountry of originThailandCSAYCurrent1.58 ADrive end bearingSleeveDutyContinuousElectrical typePermanent split capacitorEnclosureOpen drip proofFASCO7124-0263Frame48Frame length3.45 inFrame MaterialRolled steelFrame materialRolled steelFrequency60 HzInsulation classBMountingExtended studsNumber of speeds1Opp drive end bearingSleeveOutput HP1/4 HPOutput KW0.19 kWPackaged height5.63 inPackaged length15 inPackaged width5.63 inPhase1Poles4RotationReversibleService factor1Shaft diameter0.500 inShaft Diameter0.500 inShaft extension5.94 inShaft typeDouble flatSpeed1625 RPMStarting methodAcross the lineThermal protectionAutomaticULRecognizedVoltage208-230 V
Specifications
| Ambient temperature (°C) | 40 |
| Amperage | 1.58 |
| CE | N |
| Country of origin | Thailand |
| CSA | Y |
| Current | 1.58 A |
| Drive end bearing | Sleeve |
| Duty | Continuous |
| Electrical type | Permanent split capacitor |
| Enclosure | Open drip proof |
| FASCO | 7124-0263 |
| Frame | 48 |
| Frame length | 3.45 in |
| Frame Material | Rolled steel |
| Frame material | Rolled steel |
| Frequency | 60 Hz |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/4 HP |
| Output KW | 0.19 kW |
| Packaged height | 5.63 in |
| Packaged length | 15 in |
| Packaged width | 5.63 in |
| Phase | 1 |
| Poles | 4 |
| Rotation | Reversible |
| Service factor | 1 |
| Shaft diameter | 0.500 in |
| Shaft Diameter | 0.500 in |
| Shaft extension | 5.94 in |
| Shaft type | Double flat |
| Speed | 1625 RPM |
| Starting method | Across the line |
| Thermal protection | Automatic |
| UL | Recognized |
| Voltage | 208-230 V |
D783