Fasco D1196 Draft Inducer Motor, 1/30 HP, 1 Ph, 60 Hz, 115 V, 3200 RPM, 1 Speed, 3.3" Diameter, OAOD1196 Draft Inducer Motor1/30
- Write a review
$199.82
Ambient temperature (°C)40CENCountry of originMexicoCSAYCurrent1.5 ADrive end bearingSleeveDutyAir overElectrical typeShaded poleEnclosureOpen air overFrame3.3Frame length2.96 inFrame MaterialSteelFrame materialSteelFrequency60 HzInsulation classBMountingLugNumber of speeds1Opp drive end bearingSleeveOutput HP1/30 HPOutput KW0.02 kWOverall Length5.84 inPackaged height9 inPackaged length6.5 inPackaged width5.13 inPhase1Poles2RotationCounterclockwise shaft endShaft diameter0.313 inShaft Diameter0.313 inShaft extension2.31 inShaft typeFlatSpeed3200 rpmStarting methodAcross the lineThermal protectionThermally protectedULRecognizedVoltage115 V
Specifications
| Ambient temperature (°C) | 40 |
| CE | N |
| Country of origin | Mexico |
| CSA | Y |
| Current | 1.5 A |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Electrical type | Shaded pole |
| Enclosure | Open air over |
| Frame | 3.3 |
| Frame length | 2.96 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 60 Hz |
| Insulation class | B |
| Mounting | Lug |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/30 HP |
| Output KW | 0.02 kW |
| Overall Length | 5.84 in |
| Packaged height | 9 in |
| Packaged length | 6.5 in |
| Packaged width | 5.13 in |
| Phase | 1 |
| Poles | 2 |
| Rotation | Counterclockwise shaft end |
| Shaft diameter | 0.313 in |
| Shaft Diameter | 0.313 in |
| Shaft extension | 2.31 in |
| Shaft type | Flat |
| Speed | 3200 rpm |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | Recognized |
| Voltage | 115 V |
D1196